Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: dave9000 on 13 December 2011, 19:39:47
-
Hi Everyone,
Had the tensioner go this morning snapping the new belt I had fitted by the AA 2 months ago, got the parts now to replace both tomorrow but can see much in the dark or in the limited space.
Anybody got a picture or illustration showing the position of the 2 bolts retaining the tensioner?
I can obviously see the head of the pivot bolt but where is the other bolt?
Any help appreciated
Dave
-
Is this any use to you?
http://images.omegaowners.com/documents/25TD/M51D25_Engine.pdf
EDIT - I just noticed you said 2.2 TD, Have you have the 2.5TD or the 2.2 TDi?
-
im sure the bolt location will show itself in the light of day
(http://i1114.photobucket.com/albums/k536/tidla1/beltimage.png)
(http://i1114.photobucket.com/albums/k536/tidla1/beltimage2.png)
-
HI Agemo,
I have the 2.2TDI, I know it looks like I'm asking a stupid question but for'warned is for'armed. I hate not knowing what to expect when I haven't done a particular job before.
-
No worries, looks like Tidla has come up with the perfect pic for you. If you need any more info, there is a wealth of it here, and very helpful members who know everything!
-
Thanks for the help, managed to change it now, the bottom blot was a bit of i pig to get to as I air con fitted, the air con hoses are across the front of the engine, just where you need to get the ratchet. I'm glad my son's arms are a little longer and slimmer than mine are.
Dave