Omega Owners Forum

Newbie Area => Newbie Welcome Area => Topic started by: ozonekiller on 27 December 2011, 22:45:28

Title: hello
Post by: ozonekiller on 27 December 2011, 22:45:28
Hi to all other members, just joined what looks to be a very helpfull and friendly forum so I'm looking forward to reading & posting etc.  Currently halfway through cam cover gasket swap on my 2.6 so I've got bits of plenum etc all over the gaff. Bit like climbing a tree - alright till you try to come back....guides here very helpfull tho' so all should be good.
I found out that I need a coil pack too as mine is cracking. Probably due to being immersed in hot oil for a few thousand miles. Off to read about cleaning my breathers now. Toodle pip
Title: Re: hello
Post by: adey2 on 27 December 2011, 22:52:43
evening and welcome
Title: Re: hello
Post by: pauls on 27 December 2011, 22:58:23
Hello and welcome :y
Title: Re: hello
Post by: Jusme on 27 December 2011, 23:43:37
Hi & Welcome to the OOF..  :y
Title: Re: hello
Post by: Mr Skrunts on 28 December 2011, 04:29:20
Hi and welcome to the forum.   :y :y
Title: Re: hello
Post by: omega3000 on 28 December 2011, 07:09:32
Hello and welcome, just round the corner from me .....very good info and help here from an expanding omega community  :y
Title: Re: hello
Post by: Jimbob on 28 December 2011, 08:10:46
Hello & Welcome :y
Title: Re: hello
Post by: mindaz on 28 December 2011, 09:15:51
hello and welcome too  :)

happy new year 2012
http://www.banned.omegaowners.com/4hvu9uovlwzr/2012_happy_new_year1.jpg.html
Title: Re: hello
Post by: Stallion on 28 December 2011, 09:24:54
Hello And Welcome To OOF Matey!  :y
Title: Re: hello
Post by: Omega_Dan on 28 December 2011, 09:38:01
Hello and welcome :)
Title: Re: hello
Post by: Johnny English on 28 December 2011, 10:12:11
Hi & welcome ! (Cool nickname!  :y)
Title: Re: hello
Post by: Seth on 28 December 2011, 10:37:13
Welcome bud! :y
Title: Re: hello
Post by: The Red Baron on 28 December 2011, 10:58:28
welcome to the forum.  :y
Title: Re: hello
Post by: noel on 28 December 2011, 11:38:02
hi & welcome :y
Title: Re: hello
Post by: ozzycat on 28 December 2011, 12:00:18
 :y hello mate  welcome to oof :y :y
Title: Re: hello
Post by: sandune on 28 December 2011, 13:08:10
Hiya welcome aboard :y
Title: Re: hello
Post by: Dishevelled Den on 28 December 2011, 13:25:17
How do you do Killer, welcome. :)
Title: Re: hello
Post by: Cliffo B on 28 December 2011, 14:27:10
Hello,welcome to the Forum :y
Title: Re: hello
Post by: dbug on 28 December 2011, 15:37:13
Welcome to OOF mate  :y
Title: Re: hello
Post by: Entwood on 28 December 2011, 17:57:16
"Hello" and Welcome :)
Title: Re: hello
Post by: x25dt on 28 December 2011, 18:34:31
Hello and welcome :y
Title: Re: hello
Post by: ozonekiller on 28 December 2011, 19:55:10
Hi again, and thanks to all for the welcome messages. Got my passenger side cam cover seal back on and the injector set back in, still cleaning the intake plenum breather pipes etc - and yes there was indeed a certain amount of sludge in there.... could've filled a bucket.
See you around on the forum.
Title: Re: hello
Post by: PhilRich on 28 December 2011, 20:41:21
Hello & welcome  :y
Title: Re: hello
Post by: MV6Danny on 28 December 2011, 21:48:53
Hi and welcome to OOF :y
Title: Re: hello
Post by: Marie on 29 December 2011, 09:08:20
Hello And Welcome :)
Title: Re: hello
Post by: Shackeng on 29 December 2011, 09:54:17
A very warm welcome to OOF, where you should find a helpful response to any queries.:y :y :y
Title: Re: hello
Post by: waspy on 29 December 2011, 19:13:44
How do. Welcome :y :y