Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: omega3000 on 04 January 2012, 14:54:18
-
Just stripped my engine cooling rad out today "looks like the cats clawed all my hands now" >:( When i disconnected the auto gearbox pipes there were some copper seals that fell off , now do you re -fit the seals one either side of the connector or just both seals to the front or back...i have lost one and left with 3 so confused about the re fitment .
-
one either side. :y
-
one either side. :y
Mmmm strange how i cant find the 3rd one ::) are these washers specific ie VX part only or can use any copper washer ...any idea where i could get some as i might as well replace all 4 :y
-
It should be around or under the car somewhere.It would leak like a sieve if one was missing.I would imagine they are available from VX for pence if you need one.Its probably standard practice to renew them anyway,but Ive never had a problem when reusing them.
-
one either side. :y
Mmmm strange how i cant find the 3rd one ::) are these washers specific ie VX part only or can use any copper washer ...any idea where i could get some as i might as well replace all 4 :y
You sure it's not stuck to the hollow bolt? :-\ That's where they often are. :y
-
under the car somewhere
I had a quick look around but cant find it , not in the hollow either ::) always one that hides itself ,,,
:y
-
Stuck to the rad mate?