Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Tom Byrne on 13 January 2012, 21:46:57

Title: heater matrix
Post by: Tom Byrne on 13 January 2012, 21:46:57

Hi is anyone out there? Im Tom a very newby,I posted yesterday ,re above,but still no responce,
i.e tips on replacing matrix, am I doing something wrong with this message/

Title: Re: heater matrix
Post by: RobG on 13 January 2012, 21:50:31

Read this Tom http://www.omegaowners.com/forum/index.php?topic=90621.0
Any other assistance post in "Omega general help" :y

Title: Re: heater matrix
Post by: Tom Byrne on 13 January 2012, 22:14:43

anyone ellse got any tips on how to fit a new heater matrix>

Title: Re: heater matrix
Post by: RobG on 13 January 2012, 22:16:30

Quote from: Tom Byrne on 13 January 2012, 22:14:43

anyone ellse got any tips on how to fit a new heater matrix>

That`s the easiest way..................unless you wanna strip the dash out

Title: Re: heater matrix
Post by: Darth Loo-knee on 13 January 2012, 22:47:02

Quote from: Tom Byrne on 13 January 2012, 21:46:57

Hi is anyone out there? Im Tom a very newby,I posted yesterday ,re above,but still no responce,
i.e tips on replacing matrix, am I doing something wrong with this message/

Hi Tom  :y

Just checked your posts to see where you posted.
In the Newbie area is where to introduce yourself. However not the best place to post problems that you need help with.
Hope that helps as why not as many people as perhaps hoped had replied.
I have moved it for you so hope that helps :y

Title: Re: heater matrix
Post by: dad1uk on 13 January 2012, 23:33:15

Hi Tom, the advice above is the best(easiest)...... :y
The only thing I did was to remove the drivers seat to help with access because I am not the smallest of people. The one thing I forgot to do was disconnect the battery so I ended up with the airbag light on which was kindly reset at Newent last year.
The job is more fiddly than difficult and if you are carefuly how you cut the board it is almost impossible to see the join. I manage to peel the Black Vinyl back so that didn't get cut.

Title: Re: heater matrix
Post by: Tom Byrne on 14 January 2012, 14:31:09

Hi everyone, the time is now 2.30 sat. afternoon, just finished work, might give it a good course of looking at, think about it, go for a pint, watch the Man U match, and attack it in the morning.
 Thanks very mutch for your help , cheers

Title: Re: heater matrix
Post by: Darth Loo-knee on 14 January 2012, 15:00:40

Quote from: Tom Byrne on 14 January 2012, 14:31:09

Hi everyone, the time is now 2.30 sat. afternoon, just finished work, might give it a good course of looking at, think about it, go for a pint, watch the Man U match, and attack it in the morning.
 Thanks very mutch for your help , cheers

This part is the only bit that needs scraping  ;D

Title: Re: heater matrix
Post by: fakeq on 14 January 2012, 16:13:16

Quote from: RobG on 13 January 2012, 21:50:31

Read this Tom http://www.omegaowners.com/forum/index.php?topic=90621.0
Any other assistance post in "Omega general help" :y

Hello, need to do this job myself. Just wondering on the guide it seems the drivers side is right side, should I cut on the passenger side when drivers side is on the left? ::)

Title: Re: heater matrix
Post by: RobG on 14 January 2012, 16:19:46

Whatever side the matrix pipes go through the bulkhead