Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Corrado1441 on 15 January 2012, 12:56:39

Title: Remove and Clean Plenum/Throttle Bodies
Post by: Corrado1441 on 15 January 2012, 12:56:39

Hi going to remove and clean plenum and throttle bodies including all vacuum/breather pipes and was wondering if anybody can advise what bits to replace other than the following. Car is a 1996 3.0 V6 Elite

Breather bridge to plenum seal - 90467543 (1 of)
Breather bridge to throttle seal - 90500983 (2 of) or do I need 4 ???
Inlet to Plenum O-rings - 9118135 (6 of)

Title: Re: Remove and Clean Plenum/Throttle Bodies
Post by: Omega32E on 15 January 2012, 13:03:14

I followed MDTM excellent guide

http://www.omegaowners.com/forum/index.php?topic=90653.0

Also has a link for removal