Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: tm63 on 20 January 2012, 16:09:54

Title: changing gaskets
Post by: tm63 on 20 January 2012, 16:09:54

when the weather warms up a bit i intend changing my rocker box gaskets and cleaning out the breather system. just like to know exactly what i need.
2 rocker gaskets.
set of rubber seal rings for underside of rockers.
1 breather bridge to plenum seal.
4 breather bridge to throttle o-rings.
do i need a new tbh gasket? and anything else?
thanks for any info.

Title: Re: changing gaskets
Post by: Elite Pete on 20 January 2012, 16:19:33

All you'll need are the cam cover gaskets and 16 O rings also for the cam covers ;)

Title: Re: changing gaskets
Post by: tm63 on 20 January 2012, 16:22:52

Quote from: Elite Pete on 20 January 2012, 16:19:33

All you'll need are the cam cover gaskets and 16 O rings also for the cam covers ;)

ok thanks. at the same time im going to take the throttle body off and give it a good clean. does it have a cardboard gasket ,like on the v6 vecs?

Title: Re: changing gaskets
Post by: Elite Pete on 20 January 2012, 16:25:30

No, they can be reused as well :y

Title: Re: changing gaskets
Post by: tm63 on 20 January 2012, 16:26:12

Quote from: Elite Pete on 20 January 2012, 16:25:30

No, they can be reused as well :y

thanks again

Title: Re: changing gaskets
Post by: SJKOO01 on 20 January 2012, 19:04:38

Not sure if you have seen these links in the maintenance section - may help you out?  :y

http://www.omegaowners.com/forum/index.php?topic=90657.0

http://www.omegaowners.com/forum/index.php?topic=90653.0
http://www.omegaowners.com/forum/index.php?topic=90545.0

http://www.omegaowners.com/forum/index.php?topic=90542.0

:y