Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: LFF64 on 23 January 2012, 13:29:36
-
I have a dim dip mirror taken from an Omega I cant remember what it was to be honest but it was not a face lift I know that
Question is will it fit a face lift physically I am not worried about elrctric to it I can sort that no problem :y
-
If you`ve got a standard one fitted, it`s a straight swap
-
Thanks Rob
I thought I had seen something saying the mount for the face lift was different on here I will have a look at doing this then when I get 5 mins to do ::)
-
The mount for the automirror with rain sensor is different, pretty sure the others are all the same. :y
-
Fitted pre facelift direct to my facelift mount with no issues at all.
-
AFAIK, the only difference is the rain one, as Albs says.
-
Which reminds me,I really ought to wire in my autodip mirror.Its been on the car for about 6 months. ::)
-
Which reminds me,I really ought to wire in my autodip mirror.Its been on the car for about 6 months. ::)
Are you sure two wires ain`t gonna confuse you
-
Nah,its dead easy.if it makes blue sparks,its the wrong one. Join it to the other one instead - seemples. :y
-
Which reminds me,I really ought to wire in my autodip mirror.Its been on the car for about 6 months. ::)
Are you sure two wires ain`t gonna confuse you
Also,there are (possibly) more than two wires involved as I also have the rain sensor to (possibly)fit as well while Im in there. Depending if I make my mind up that I want it,and if so,find out how to go about wiring it. ;)
-
Thanks for all the answers I dont have a rain sensor ::)
-
Nah,its dead easy.if it makes blue sparks,its the wrong one. Join it to the other one instead - seemples. :y
You got to watch those wire thingies. I once had a proper mini, and took the boot off to paint the rust bits. I refitted it, but got the numberplate wires the wrong way round. It was OK for a while, but when the paint wore through it kept shorting out the battery, so it wouldn't charge when the lights were on. Took a while to figure that one out........
Ken
-
Fitted and working ,but I will have to wait until after work to try it out for real :y