Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: noel on 12 February 2012, 11:01:37

Title: v6 filler neck removal
Post by: noel on 12 February 2012, 11:01:37

is there any way of getting a socket through the access hole to extract the bolt that holds the filler neck in place.
have tried the star shaped sockets but cant get anything slim enough to access the bolt. ;)

Title: Re: v6 filler neck removal
Post by: RobG on 12 February 2012, 11:10:46

Quote from: noel on 12 February 2012, 11:01:37

is there any way of getting a socket through the access hole to extract the bolt that holds the filler neck in place.
have tried the star shaped sockets but cant get anything slim enough to access the bolt. ;)

Lift the tab over the bolt and turn the neck anti-clockwise

Title: Re: v6 filler neck removal
Post by: Elite Pete on 12 February 2012, 11:12:37

As Rob says :y

 the tab is located under the wiring loom :y

Title: Re: v6 filler neck removal
Post by: noel on 12 February 2012, 11:27:15

thanks guys how simple was that  ;D ;D  i thought the bolt was holding it in >:(. i now feel a right dimbo  :-[