Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: ted_one on 21 February 2012, 15:58:51
-
In the middle of an interior swop and went to fit front seats and they do'nt seem to fit,bolts are to short for runners and the seats do'nt have any way for manual adjustment.The passenger side is working fully but the drivers side is'nt,what I was wondering is would it possible to convert the drivers side seat to a manually adjusting item by swopping it on to a different Omega seat base. Also is it possible to get longer bolts for the passenger side as if it's possible I was hoping to keep it as it's working OK.The car is an ex police 2001 3.2 with the usual poverty interior >:( :y
-
Just a P.S I ca'nt use the bases from the old interior cos guess what I've already taken it to the dump,clever me DURR!! :-[ :-[
-
The Elite leather seats have longer bolts than other models and there's a wiring diagram in the maintenance section ;)
-
Many thanks for the advice looks like it going to save me a load of grief,any ideas on the longer bolts.main dealer??
-
Many thanks for the advice looks like it going to save me a load of grief,any ideas on the longer bolts.main dealer??
Yes :y
-
Someone on here might have some they could send you. Dont think I have any at the moment but someone might.
I seem to remember that its only the rear bolts which are longer,but I could be wrong. :-\
-
Thanks for that,you're right because I nipped up the two front bolts and then confusion when I tried the rears. :D :y