Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: JamesV6CDX on 21 February 2012, 21:21:23
-
I need, if possible, from a V6 please:
Gearstick, gaitor, and associated linkage down to the gearbox... basically the stuff rivetted into the tranny tunnel
Dual Mass flywheel (and clutch kit if still servicable)
Propshaft
Clutch Pedal
Clutch Master Cylinder
Anything else needed for manual conversion! (I have the gearbox)
I can collect these items in my project chucklebus, but can't do so for just over a week...
Let's operate on this 3.2 and let it live on :y
-
if you not in rush I can have most of them parts in next few weeks
-
buy the clutch master cylinder from new imo
-
Decision made! Nice one! Good luck James :y
Oh sorry, I don't have any of the parts :-[
-
I have a manual propshaft and a few other odd's knocking around.... I'd need to check.
-
I have a manual propshaft and a few other odd's knocking around.... I'd need to check.
Cheers mate, let me know :y
-
If you had said before you picked up the gear box i would have got out all i had ???, now i am going back to my shed to have a look :-\ :y
-
If you had said before you picked up the gear box i would have got out all i had ???, now i am going back to my shed to have a look :-\ :y
cheers joff, ideal!
-
Been out in the cold and wet but it looks like its all gone. I do have a servo with master on it and the pipe that goes to the gearbox if i remember correctly. ???
-
have you had a look at vaux plus they are cheap for parts james :y :y :y :y