Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Okan ÖZKAN

Pages: [1] 2
1
Yes thanks a lot for your helps  ;) :y

2
Yess correct cables . I connect a speaker now it works. but sound is thinner I think I need to learn the original speaker specs and buy a new speaker .

3
If the cables are correct in the picture , I am going to try to connect a twitter and try my speaker is broken or not . They are going to inside of the car . I opened the cover a bit there are two cable .
http://oi64.tinypic.com/smt0xs.jpg

4
Hmmm I guess I couldnt understand the location exactly  :-[

How can I reach that location where should I start :)

5
The sensors work fine I can hear the signals of all four sensors from outside of the car but there is no sound in the car even I select reverse gear . There is no starting BEEEP sound . I guess the speaker is broken that's why I need to learn that where its located .  ??? ???

6
So Is there anyone who know the colors of the cables of speaker or what is the easiest way to reach these cables ?

7
Thank you so much I will try :)

8
I dont think that I can do this :) What should I do to reconnect another speaker direct from parkpilot ecu

9
What should I remove to reach to the speaker ?

10
Hello ,

I have 2003 Opel Omega 2.6 . Although the parking sensors work fine , there is no beep sound and any signal in the car when I engage to reverse gear . I guess the speaker is broken . Is there anyone who know the location of speaker .

11
Omega General Help / Auto Transmission
« on: 24 October 2012, 03:21:18 »

I want to learn the km of changing of transmision fluid of my car . Is there anyone who has some information ?

2003 Opel Omega 2.6 V6

12
Omega General Help / Re: Omega 2.6 Catalytic Convertor Problem
« on: 10 September 2012, 18:49:30 »
help please...

13
Omega General Help / Re: Omega 2.6 Catalytic Convertor Problem
« on: 21 August 2012, 12:51:00 »
I still couldnt find any solution for catalytic warnings . Is there any rule for the positions of o2 sensors of my car or any rule which we have to obey while replacement ? Because there was only one warning on bank2 before I changed the sensors and I was thinking that it was a result of broken o2 sensor .  I changed all of them and the sensor warning gone (bank2 sensor2) but catalytics are give error code . What should I do is there anyone who can share under side of o omega 2.6 to compare with mine .

14
Omega General Help / Re: Omega 2.6 Catalytic Convertor Problem
« on: 07 August 2012, 13:42:53 »
But when I start the engine first time there is a sound like there is a screw in exhaust system but only first 5 mins . Also there is a problem about engine temperature . It was around 85-90 C but now its increasing to 95-96 C in a least uphill . What can be the problem ? .  It can be catalytics ???

15
Omega General Help / Re: Omega 2.6 Catalytic Convertor Problem
« on: 06 August 2012, 00:46:42 »
There is only a catalytic converter for 2.2 diesel omega in Steve's shop:(

Pages: [1] 2

Page created in 0.009 seconds with 14 queries.