Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega Electrical and Audio Help / Re: crack or cam sensor?

« on: 19 January 2011, 00:24:22 »

well, the car works fine. While the car is cold ( less than 80-85 C) sometimes check engine light isnt ON when starting the car, and the car revs past 4.5k rpm. then, when warm, it just stalls while driving, then I just turn it on and continue driving with 'Check Engine' in the display.

what do u mean by 'some time'? How much time?
maybe i should disconnect the battery for a while? dunno.

I can turn the car on and off for ~10 times, and one of those times the check engine light probably will not be ON.

I just dont know why the car stalls after a while, if car started without check engine light, dunno if it's realted to temperature or just randomly stalls when it wants to.

There have been a few times when the car stalled with the Check Engine light ON, but when there are no warning lights in display, it'll stall after a while, that's for sure, and after starting it again, it'll have 'Check Engine' on dash.

dunno about sensor, i just know it was 80$.

2

Omega Electrical and Audio Help / Re: crack or cam sensor?

« on: 17 January 2011, 15:52:55 »

well, I have a new cam sensor, but still - code 0340 shows, which means there is a fault with cam sensor. maybe the wiring is the problem. will check the wiring tomorrow.

3

Omega Electrical and Audio Help / Re: crack or cam sensor?

« on: 16 January 2011, 14:52:45 »

will check the wire, but my car sometimes doesnt have check engine light on, and it revs up to 7k rpm, but at about 85C car stalls, and when I turn it on, check engine light is on again. Well, what im trying to say is - it sometimes works, but not for long, and when it decides not to work, the car stalls. Will check the wire tho.

4

Omega Electrical and Audio Help / Re: crack or cam sensor?

« on: 14 January 2011, 17:25:02 »

changed cam sensor, for about 15 minutes I was happy. Now 'check engine' light again is on. 100$ well spent. any ideas on what to do next?

5

Omega Electrical and Audio Help / Re: crack or cam sensor?

« on: 12 January 2011, 17:34:41 »

oh, forgot about those details - '00 x20xev.

fault codes said it's cam and crank sensor.

6

Omega Electrical and Audio Help / crack or cam sensor?

« on: 12 January 2011, 17:14:02 »

so.... time to change sensors. Max rpm is 4.5k, car sometimes stalls while driving and once it didnt want to start at all, after a minute of trying it did. should I change both sensors?

7

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 19 December 2010, 23:30:13 »

I guess it is aftermarked then. But well, thanks everybody for trying to help.

8

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 19 December 2010, 23:16:09 »

as I said - i have tested it, I can't start the car while alarm is armed. I didnt just make it up, I have tried to start my car while alarm is armed. It just doesnt work like that for my car. I have to turn off alarm and then I can start the car. While alarm is armed if the car starts(sometimes it does) it just will stall after 1-2 seconds and there's nothing I can do about it.

9

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 19 December 2010, 22:59:20 »

well, yeah, but that doesnt change the main thing - if i dont disable the alarm then there is no driving for me. But ok, tomorrow i'll disable it completely.

10

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 19 December 2010, 22:36:33 »

when the alarm is armed I cant start the car. tomorrow a friend will help me and we'll disable the alarm completely.

11

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 19 December 2010, 21:28:01 »

sorry for double post, but I somehow managed to sync remote with car alarm, then after 5 minutes of trying car unblocked and I was driving away for some gas. And at the gas station I cant unblock it again. so, my car is still there. And the question is - does the car alarm unit has batteries of its own? If yes, where I can find the alarm box? It's not under the seat Is it under hood?

12

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 18 December 2010, 21:02:35 »

last time my batteries were out for a day, but then I just sat in car, turned ignition on II and pressed some buttons and all worked. But now I cant even do it.

13

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 18 December 2010, 13:00:03 »

the fob worked few days ago. now it just doesnt. and i cant sync it to car....  Well, the fob works, the car just doesnt respond to it....

14

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 18 December 2010, 12:16:20 »

not to start, to disable the alarm with the key fob. is there a fuse to take out to disable the alarm? or something like that? Cuz I really need the car today.

15

Omega Electrical and Audio Help / Re: car alarm remote works, but doesnt disable alarm.

« on: 18 December 2010, 11:22:47 »

batteries ar not flat, the red light is flashing when pressing keys. i can get in car and put key in ignition, i just unlock car manually. but it just doesnt work. i tried for about 15 minutes last night.