Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - bow123

Pages: [1]
1
Omega Electrical and Audio Help / telematic unit
« on: 07 September 2013, 07:25:07 »
i have a ncdc2015 with the telematic unit i have been searching for a while now but cannot find out what the brass aerial connection is on the back of the telematic unit would any one have any idea what i would be looking for

2
Omega Electrical and Audio Help / Re: telematic unit help
« on: 01 April 2013, 20:11:28 »
so if i am to use a 2 wire mic what pins do i need to use the wiring is not in my vectra i am retrofitting this

3
Omega Electrical and Audio Help / Re: telematic unit help
« on: 01 April 2013, 19:18:39 »
PIN 1 - 2 - 17 SEEM TO BE FOR THE MIC THIS IS THE WIRING FOR THE TELEMATIC UNIT THERE SEEMS TO BE 3 WIRES FOR THE MIC

Pin 1 - Microphone signal
Pin 2 - Shielding (assuming for the microphone wires)
Pin 3 - Handset connector pin 3
Pin 4 - Nav system control line pin 35
Pin 5 - Nav system control line pin 36
Pin 6, 7, 8, 9, 10 - Not connected
Pin 11 - Medium Speed CAN - High (nav system pin 32)
Pin 12, 13, 14 - Not connected
Pin 15 - +12v constant voltage FI1, 20A
Pin 16 - +12v constant voltage FI1, 20A
Pin 17 - Microphone signal
Pin 18 - Handset connector pin 1
Pin 19 - Shielding - Handset pin 4
Pin 20 - Nav system (Antenna Amplifier - looks like Navi Pin 7)
Pin 21 - Handset connector pin 5
Pin 22, 23, 24 - Not connected
Pin 25 - Airbag ECU pin 15 (looks like an airbag deployed signal)
Pin 26 - Diagnostic port - pin 8
Pin 27 - Medium speed CAN - Low (nav system pin 33)
Pin 28, 29, 30 - Not connected
Pin 31 - Ground
Pin 32 - Ground

4
Omega Electrical and Audio Help / Re: telematic unit help
« on: 01 April 2013, 19:09:09 »
i retrofitted the ncdc2015 so i will not have the wiring i would take it

5
Omega Electrical and Audio Help / Re: telematic unit help
« on: 01 April 2013, 19:02:51 »
wonder what type of mic it is using for it has to be wired to the 32 pin plug of the telemantic

6
Omega Electrical and Audio Help / telematic unit help
« on: 01 April 2013, 09:27:19 »
i have a telematic unit with the ncdc 2015 retrofitted to my vectra c what mic do i use with this unit and what is the 6pin plug beside the 32pin plug does a mic or something plug into that

Pages: [1]

Page created in 0.009 seconds with 14 queries.