Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: Flat Windscreen Wipers

« on: 18 September 2007, 23:39:36 »

are they better than the BOSCH ones?
i looked on Ebay and found the guy you were on about, but no sign of blades for my omega

I got a pair off ebay and the drivers blade judders at the very end, Ill stick with Bosch in the future, they're £1 cheaper from the same guy

2

Omega General Help / Re: 3 button omega key fob

« on: 09 September 2007, 00:42:33 »

Can you tell if it's Delphi or Bosch?

Says on the square panel on the back of the key if not worn away.

no its worn away on both of them

3

Omega General Help / Re: 3 button omega key fob

« on: 08 September 2007, 18:56:41 »

just pulled both fobs apart and the circuit boards look very different, on closer inspection (with a magnifying glass) my original one has 92MHz on it, the other one doesn't have any frequency markings, so i think that's my question answered.

 Thanks all
 
                 Alistair

    P.S. anyone want to buy a 3 button fob thats not 92MHz v.g.c.

4

Omega General Help / Re: 3 button omega key fob

« on: 08 September 2007, 18:18:20 »

yes, but its not as simple as that, i've already bought one in very good condition and previously tried what you said with no joy, it will start the car but wont opperate the door/boot locks, so i took it to vx for programming, they tried and failed because it works of a diffrent frequency and wouldn't accept the code for my car,

5

Omega General Help / Re: 3 button omega key fob

« on: 08 September 2007, 17:55:24 »

thanks for reply Paul, but the switches are coming adrift from the circuit board, hence I need the whole thing and re-pogramming

6

Omega General Help / 3 button omega key fob

« on: 08 September 2007, 17:41:47 »

I'm needing to replace my key fob, I believe there are two frquencey's available but I don't know what they are or which one to get, can anyone help please, the cars a 2001 3.0 elite saloon with anti-theft,



thanks
           Alistair

7

Omega General Help / ecc high pressure service valve help

« on: 07 September 2007, 01:37:28 »

I have a leak from the high pressure valve on my air con system, its the ball bearing type valve not the tyre type, vx dealer says they have no record of this type of valve only the tyre type and i will have to buy a new pipe at £132 plus fitting to repair the leak, surely this cant be right as i know this type of valve is fitted to other cars e.g. astra ect. can anyone help please?
P.S the cars an early 2001 3.0 elite saloon