1
Omega General Help / Re: rubbing noise as clutch is disengaged
« on: 18 August 2013, 17:53:44 »
Clutch bearing is only working when clutch is disengaged. So it seems it is worn.
- 14 December 2025, 09:21:15
- Welcome, Guest
News:
Welcome to OOF
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Omega General Help / Re: How do I remove the oil filter body on a paper element filter?
« on: 18 August 2013, 17:43:21 »
It is possible. I have seen HEX bolt holding oil filter body. On 2.6 V6 Vectra engine
3
Omega General Help / Re: How do I remove the oil filter body on a paper element filter?
« on: 18 August 2013, 17:20:33 »
Maybe this photo will help you. All you need to do is to loose that bolt shown on picture. Size 24 or 27...?
4
Omega Gallery / Re: 2000 Opel Omega Caravan Sport 3.0 Manual/LSD
« on: 18 August 2013, 06:22:54 »
My bad, forgot to write "with LSD" in our country 
. You are right, it is not the only b-fl 3.0 MT, but it seens that only this one has LSD. Or the owners have no clue of this diff in their cars
. You are right, it is not the only b-fl 3.0 MT, but it seens that only this one has LSD. Or the owners have no clue of this diff in their cars
5
Omega Gallery / Re: 2000 Opel Omega Caravan Sport 3.0 Manual/LSD
« on: 17 August 2013, 20:42:35 »
As far as I know, it is only known B-FL 3.0 manual Omega in our country.
6
Omega Gallery / Re: 2000 Opel Omega Caravan Sport 3.0 Manual/LSD
« on: 16 August 2013, 13:42:29 »
Car is completely re-painted in professional paintjob studio, fitted with new hood, quarterpanels, doors. Also headlights are new (Hella).
At this time, we are working on re-constructing interior door trim
At this time, we are working on re-constructing interior door trim
7
Omega Gallery / 2000 Opel Omega Caravan Sport 3.0 Manual/LSD
« on: 16 August 2013, 13:12:40 »
Greetings from Slovakia.
I would like to show my Omega to you, members.
It is Omega B-FL Caravan Sport 3.0 with manual transmission, fitted with LSD differential.
Engine modified: Compression ratio 12:1, de-cat, polished throttle body, short intake.
Fitted with Bilstein B6 kit, Irmscher struts, polyurethane bushes
I would like to show my Omega to you, members.
It is Omega B-FL Caravan Sport 3.0 with manual transmission, fitted with LSD differential.
Engine modified: Compression ratio 12:1, de-cat, polished throttle body, short intake.
Fitted with Bilstein B6 kit, Irmscher struts, polyurethane bushes
8
Omega General Help / Re: Climate Control issue
« on: 16 August 2013, 13:07:42 »
Hello. I have the same problem. When I set temperature and push AUTO button, blower keeps its maximum speed, no matter the temperature of interior.
If I manually set speed of blower, it slows down no problem.
I have checked live data. Interior and exterior temperature is correct, so I assume sensors are working.
Any help? Is it possible that I will have to change air condition electronics (with buttons in dashboard...?)
Thank you
If I manually set speed of blower, it slows down no problem.
I have checked live data. Interior and exterior temperature is correct, so I assume sensors are working.
Any help? Is it possible that I will have to change air condition electronics (with buttons in dashboard...?)
Thank you
Pages: [1]