1
Omega General Help / Re: Front exhaust pipe
« on: 01 January 2016, 15:02:33 »
Yeh I saw that aswell, still not done it yet!
- 11 December 2025, 16:46:07
- Welcome, Guest
News:
Please play nicely. No one wants to listen/read a keyboard warriors rants....
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
General Car Chat / Re: So what have you done to your car today?
« on: 31 December 2015, 13:26:43 »
Fitted io play2 hands free and repaired TID with a zafira one 
3
Omega Electrical and Audio Help / Re: Knackered TID
« on: 31 December 2015, 12:56:12 »
All sorted, loose connection somewhere 
4
Omega Electrical and Audio Help / Re: Knackered TID
« on: 31 December 2015, 10:29:06 »
Quick update, I have successfully fitted a zafira TID into my omega by taking the internals of the zfira tid, de-soldering the buttons off and fitting into the omega casing 
. The Radio part with date and temp on is perfect but the bottom part used to have the brake pad light on but that's not on now so maybe need to move the bulb position in the back of the tid? Also its just set itself via rds which I don't think it used to do
Heater panels still not on tho so some more tinkering to do
. The Radio part with date and temp on is perfect but the bottom part used to have the brake pad light on but that's not on now so maybe need to move the bulb position in the back of the tid? Also its just set itself via rds which I don't think it used to do Heater panels still not on tho so some more tinkering to do
5
Omega Electrical and Audio Help / Re: Knackered TID
« on: 30 December 2015, 12:40:17 »
Thanksfor reply, mines manual box, if anyone does have one for sale I deff need one Would a knachered tid stop the radio and heater panel from working as they were ok before the tid fell apart
Would a knachered tid stop the radio and heater panel from working as they were ok before the tid fell apart
6
Omega Electrical and Audio Help / Re: Knackered TID
« on: 30 December 2015, 07:08:30 »
Also do you need to pair these up like you do with the newer ones?
7
Omega Electrical and Audio Help / Re: Knackered TID
« on: 29 December 2015, 20:08:38 »
Thankyou much appreciated
8
Omega Electrical and Audio Help / Knackered TID
« on: 29 December 2015, 19:13:27 »
Was halfway through the missing pixel repair but when I got the board and screen half the ribbon cable just came away from the board, i'm assuming old age has degraded it! Any way is the only option a replacement as cant find one on ebay, I have a zafira one but its different. Mine has yellow plug.
9
Omega General Help / Re: Front exhaust pipe
« on: 27 December 2015, 16:56:13 »
Cheers terry wasn't sure what product to go for , its after the sensors so shouldn't be a prob?
, its after the sensors so shouldn't be a prob?10
Omega General Help / Re: Front exhaust pipe
« on: 27 December 2015, 16:20:29 »
What do you guys do at the butt joint/ flange between cat and 1st section of exhaust, mine just had paste in when I took it apart butt cat came with a crush sort of gasket which I have attempted to use butt I think its blowing, passed mot though!
11
Omega General Help / Re: FAE cam sensor
« on: 13 November 2014, 20:01:56 »
Well can report my saga is over, thankyou Taxi Al, went to check the fuse you said, seems it had worked loose a bit, pulled it out very easily, pushed it back in and Bingo, started 1st click !! At least its got its new cam sensor which it had been asking for at lives to fight another day
12
Omega General Help / Re: FAE cam sensor
« on: 13 November 2014, 11:02:44 »
Can't post pic but is fuel rail above inlet manifold? There's no pressure when push pin in on that under the black cap. Will check fuse/ relay later thanks for reply
13
Omega General Help / Re: FAE cam sensor
« on: 13 November 2014, 08:05:07 »
Just been to car, now thinking maybe fuel pump as can't here it when turn key just a faint click in engine bay
14
Omega General Help / Re: FAE cam sensor
« on: 13 November 2014, 06:56:30 »
Thanks lads will check for fuel/ spark. I thought it was gonna fire straight up as it did try the very 1st try but then it's just cranking over with no hint of firing up.
Pages: [1] 2