1
Omega General Help / Re: Saturday oil change...
« on: 11 January 2015, 15:06:49 »
I definately suggest you do the spin on-conversion. Easier to fit than new housing and much, much more reliable!
Search the maintenance guides for answers to 99.999% of Omega questions
Missed only onelets see if this helps young bear.You missed 2, Manual Box and a Short Shift stick.
bottem end from a 3.2
heads from a 2.5
cams from a 3.0/3.2
manifolds from a 2.6/3.2
fuel pressure reg from a 3.2
injectors from a 3.0 unless its underfueling then use 3.2 ones
3.0 downpipes, jetex full system
r28 manwell gearbox
matched inlets,and plenum
widened throttle body,
goverment/svo ecu, 99'octane fuel'optimax'
lsd,new subframe bushes,
all in a 3.0l facelift,with 17" wheels,poly front bushes.std plod spec springs,b4 or b8 bilstens all round,if you want to go stiffer,then start to seam the shell,and fit a full grp A cage.
and to stop it audi brake conversion.
hope this helps, some may disagree with my thoughts.!!, but what do I know.
37k - that is shocking. Still at least you are getting some parts before it is turned into a fridge or whatever.Or a Prius
What a throw away society we live in.
Anyone got a part number for the right one? Or one for sale that will match ?As far as I know you should be able to fit any ABS ecu there if it's from manual non-DBW v6 and has ABS/TC configs inside.
That might be....
. But then again never seen or even heard the front oneStrange..
Perhpas Finland doesn't get warm enough for the engine to need additional circulation when it's stopped![]()
Is it on top or lower water hose or where?Is that an FL or vauxie only feature since I've never seen one
My MFL V6 was fitted with one, as I'm sure all V6s are, not sure about the 4 potsI can't see that it's Vx only as it's a simple means of preserving your car engine from cooking itself after a run when ambient temp is high
I think we should get Webby to give us a full documented video of how to do this job
You want a video of a fat lad cross threading every bolt?![]()
You can reach under the car all the way to coolant bridge, at least with my monkey armsIt still looks like a PITA!![]()
Mind you, it's not an issue that I've seen crop up on here regularly so I'll file that in the 'Hope not' folder along with the leaky head gasket!![]()
Its overlooked imo , especially seeing how its hidden at the backMite be able to put your hand down there an see if its leaking