Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / No Spark

« on: 19 October 2007, 13:45:14 »

 
Have rebuilt the top end, after head gsket, but i didnt strip it.

I have no spark, the crank sensor appears to be wired, as is the cam sensor, howevr i am not happy that the crank senro wiring seems out of place.

The sensor has a wire as part of the item, and the wire for this comes up to the top of the mtor, and connects to another three pin connector that is wired across the main loom carrier, but this just doesnt look right.

Also the cam sensor and crank sensor have the same connectors, have swapped bu to no avail.

Any ideas?

The only other anomolie is a wire at the rear of the head that has a spade connector that is roaming free, and doesnt seem to have a home.

I would also ask if anyone knows the resistance values of the cam and crank sensors?

Cheers guys a great site and life line.

the assessor

2

Omega General Help / crank sensor cable

« on: 19 October 2007, 16:23:48 »

hi guys (again) have half sdorted it, the crank sensor is no connected to the correct cable/socket, where is the socket that the cable plugs into within the engine bay.

great help so far, thank you


the ASSessor

3

Omega General Help / cam pick up resistance

« on: 14 October 2007, 17:57:06 »

Any one have a clue on this one?

Bought the omega dismantled. (never again)

I have it built bakc up, but have noe spark, chased my back end a little to find it and now suspect the cam pick up.

does anyone know the resistance of the pick up when  not connected?

Cheers Guys

 :-/