1
Newbie Welcome Area / Re: New from the Netherlands
« on: 03 August 2015, 03:03:59 »
I hoped that i've lost you. Wrong again. 
- 24 July 2025, 15:03:20
- Welcome, Guest
News:
Welcome to OOF
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Omega General Help / Re: reqr diff
« on: 01 August 2015, 15:51:44 »
do it your self, unscrew the nut and take of the triangel.
change the seal replace the triangele and screw on the nut. turning pressure is 10 NM force.
without the drive shafts left and right to the wheels.
if i kan do this
you can do it to.
change the seal replace the triangele and screw on the nut. turning pressure is 10 NM force.
without the drive shafts left and right to the wheels.
if i kan do this
you can do it to.
4
Omega General Help / Re: Multiram mess
« on: 01 August 2015, 15:35:18 »
it will work now. it works under torque. use the kickdown when you are driving and at 4 to 5000 rpm it will open en kicks in.
5
Omega General Help / Re: Multiram mess
« on: 01 August 2015, 15:08:15 »
this one goes onto the fuelpressure rail.
and the one on the fuelpressure rail needs vacuum.
6
Omega General Help / Re: staring problem
« on: 01 August 2015, 05:54:46 »
I say diskpack (dismodule)
7
Omega General Help / Re: modification of the oil filter (question)
« on: 01 August 2015, 05:43:05 »
i want de spin on. and forget the cardridge.
some people say that the mod.. only is for de older engines like the 3.0 and 2.5..
some people say that the mod.. only is for de older engines like the 3.0 and 2.5..
8
Omega General Help / Re: modification of the oil filter (question)
« on: 31 July 2015, 19:09:32 »
i don't like the cartridge and i was hoping that it wil fit on my 2003 omega.
and it is leaking.
and it is leaking.
9
Omega General Help / modification of the oil filter (question)
« on: 31 July 2015, 18:52:27 »
in this topic there is an modification for the filter.
question is this posible for the 2.6 and 3.2
http://www.omegaowners.com/forum/index.php?topic=90579.0
question is this posible for the 2.6 and 3.2
http://www.omegaowners.com/forum/index.php?topic=90579.0
10
Newbie Welcome Area / Re: New from the Netherlands
« on: 31 July 2015, 18:44:16 »
thanks guys, the motor is running fine after a complete overhauling. incl. valves, valveseals, valvesprings and more..
the car it selves is complete painted.
the car it selves is complete painted.
11
Newbie Welcome Area / New from the Netherlands
« on: 31 July 2015, 11:01:09 »
Hello, my name is Ralph i live in the Netherlands as an mechanic and i am owner of a garage called R en R Cartechnics well known as The Omega dokter also member of the opel omega portal.
here are some pics of the omega.
Nitrous gas injected engine.
here are some pics of the omega.
Nitrous gas injected engine.
Pages: [1]