Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: MV6 -96 high idle when warm

« on: 13 April 2017, 18:40:09 »

It was the tiny hole in t-piece (strange). I made a temporary fix from rubber hose and hose "clip", seems to work now. Idles perfectly at 600rpm. Thanks for help everyone!

2

Omega General Help / Re: MV6 -96 high idle when warm

« on: 13 April 2017, 16:42:41 »

https://www.dropbox.com/s/u2524qasbmubmbr/2017-04-13%2018.24.38.jpg?dl=0

Some progress! Found a tiny hole in this T-piece. Patched it up with tape ( ), then ran the engine hot. Idle was definetly lower (800-900rpm) for about 5 mins, then back high . Does the ecu need to be reset or something? Where can i buy this T-piece, part number or link?

edit: Pic not working. Anyway the t-piece is the one closest to the hole where the oil is added.

3

Omega General Help / Re: MV6 -96 high idle when warm

« on: 13 April 2017, 14:37:34 »

I cleaned it with crc oil, and compressor air. Although didn't look so bad in the first place. I could search air leaks with start pilot or something similar.

4

Omega General Help / MV6 -96 high idle when warm

« on: 13 April 2017, 11:32:04 »

My omega is idling high when reached normal temp (about 1500rpm). I have cleaned ICV, chanced MAF, looked for airleaks. When disconnecting the ICV and plugging it back, idle lowers to normal for a 5 seconds, then back to 1500-2000. What to do? Could it be temperature sensor or what?