1
General Car Chat / Re: So what have you done to your car today?
« on: 30 June 2025, 18:24:57 »
The seats fought back, they fitted before but had to wrangle them to fit. Vinyl paint still tacky as well. PIA for me to post pics on here.
- 05 July 2025, 07:35:48
- Welcome, Guest
News:
Please play nicely. No one wants to listen/read a keyboard warriors rants....
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
General Car Chat / Re: So what have you done to your car today?
« on: 30 June 2025, 08:53:24 »
Painted the Astra GTE seats that are going in the Austin Omega, they were grey and its all black inside. Fabric spray made it feel a bit "crispy" I will see how it is after drying overnight. I do have black leather to cover them but cant get them done in time for its maiden hot rod show trip.
3
General Car Chat / Re: So what have you done to your car today?
« on: 26 June 2025, 08:56:50 »
Took a Yeti full of rubbish from my unit to the skips, lots of cardboard from new parts for the Austin. I can now open the other door without a landslide! Front wheels in car as well to get balanced when I pick up the rear wheels with new boots on today. Not long now before shakedown runs, bleed the brakes again with only some minute bubbles from front caliper and suspect that was being sucked in around nipple threads. Brake solid but goes quite soft with servo, normal for Omega?
4
General Discussion Area / Re: Trump has gone to the top .
« on: 23 June 2025, 08:16:43 »
The only reason Trump bombed Iran was to try and raise his popularity rating as it was down to 40% and dropping. Thing is it looks like it has had the opposite effect!!
5
General Car Chat / Re: So what have you done to your car today?
« on: 20 June 2025, 16:40:39 »
I have the same trouble so have to take care, well I did some to the Austin today. Its insured and I got most of the remaining bits painted, only got 5 flies in the paint!!! Little bit to finish off tomorrow and then assembly time.
6
General Discussion Area / Re: What has P*ssed you off today?
« on: 19 June 2025, 15:16:44 »
The Texaco fuel station has changed hands and brands, now I have to find one so I can cash my fuel savings in.
7
Omega Electrical and Audio Help / Re: Further ABS fault
« on: 17 June 2025, 16:58:43 »
It was the under dash tray pushing the switch up, bit more panel cutting then!!!
8
Omega Electrical and Audio Help / Re: Further ABS fault
« on: 16 June 2025, 17:43:19 »
Yes thats what I thought, I checked wiring dia and it just feeds ABS from same wire as feed to brake lights. I checked for continuity and that was fine. More head scratching then.
9
General Car Chat / Re: So what have you done to your car today?
« on: 16 June 2025, 15:50:54 »
Just ordered 2L of 2k paint for the Austin as weather looks good for next few days, eff me £130!!!!
10
Omega General Help / Quick question
« on: 16 June 2025, 15:46:50 »
Live data says engine running lean, I know I can smell it. Bank1 and 2 say 128 when cold and 134 when hot what ever that is. Says rich if I rev it, no intake leaks I could find, idle speed spot on , temp gauge matches scanner and no exhaust leaks. Any ideas?
11
Omega Electrical and Audio Help / Re: Further ABS fault
« on: 16 June 2025, 15:42:11 »
Yes but now it says brake switch fault but that works , checked the wiring and all looks okay. Brakes do need bleeding as a bit long travel when servo working. Only 2 wires on switch by the way.
12
General Car Chat / Re: So what have you done to your car today?
« on: 15 June 2025, 18:29:01 »
Quite a lot on the Austin, sorted the ABS "fault" . Works better with an earth wire on the pump motor! Checked all the suspension bolts, top up diff but cant get plug out of gearbox not that it lost any oil while out. Lots of other stuff done but have to make blanking plates for the air injection holes in n/s exhaust as it looks like my blanking grub screws failed.
13
Omega Electrical and Audio Help / Re: Further ABS fault
« on: 15 June 2025, 18:24:09 »
Its working, yup works better with the earth lead on the motor!!!! I know why I missed it as unit fitted before engine and it was hidden, only saw it today as doing some checking /snagging jobs and was lay underneath.
14
Omega Electrical and Audio Help / Re: Further ABS fault
« on: 14 June 2025, 17:26:40 »
Well neither my scanner or Ds modern one will support activation of pump, tried to get the relays out to bridge pump feed but only the top came off one (not the one I wanted) and the other refuses to budge. D will see if the folks he sends ABS units to can fix this one on Monday.
15
Omega General Help / Re: Temp gauge & drip issue.
« on: 14 June 2025, 17:22:46 »
Yes if you ground it gauge will read max.