Show Posts

1

Omega Electrical and Audio Help / wiring help

« on: 25 July 2011, 21:28:02 »

Hi,
I’m having a problem with wiring. My mechanic cut some wires when he was repairing front of the car that was damaged in a crash and today i put that wires back together. To be precise, he cut the wire from a fan (the one that blows to the fuse box) and wires from some pump near the cooling box.
Now my question is, when the fuse fan starts to blow, mine doesn’t start, and second question is regarding that pump. The pump starts instantly, when i turn the ignition (don’t start the engine) and continues to work without stopping.

This pump is located on the left side of the engine (passenger side, euro. vehicle). One hose goes in the pump and two out, if I’m correct.

Need the answers because i don’t know if the wires are connected correctly.

Tnx.

2

Omega Electrical and Audio Help / Re: big problem with radiator fans

« on: 06 March 2008, 20:53:07 »

there are 2 in front that are cooling aircon and that one on fhe radiator that is cooling the engine coolant. the one on radiator is stuck and always on and other 2 are powering when i put key in and switchit on but aircon is off and they should not be on

3

Omega Electrical and Audio Help / Re: big problem with radiator fans

« on: 06 March 2008, 13:16:35 »

i check it (unplug it and fans didn't switch off) that termo on radiator i heard that there is thermo switch on engine but cant find it

4

Omega Electrical and Audio Help / big problem with radiator fans

« on: 06 March 2008, 13:04:51 »

hawing problems with radiator fan (it wont turn off even when i turn the car of only thing is to pull out 30A fuse) and climate fans are also on even that climate is off, but they switch off when i shut down the car). I checked the relays today but no success. Do you have any ideas on how to solve this problem cause this is pain in the ass my car cant get to the normal temp with fans always on.

5

Omega General Help / Re: Power steering question

« on: 26 January 2011, 21:28:43 »

OK, thats the thing than what he was talking about. Steering box with wire. What difference is there. Is mine 100% with wire and can steering liquid come out of the box?

I have also a little empty space when turning the steeringwhel.
Also when turning from one to the other side (on standing still) i got a kick (klick) sound?

Anyone may answer this?

6

Omega General Help / Re: Power steering question

« on: 26 January 2011, 19:34:23 »

And what is steering box now? Pictures or link to one pls.

7

Omega General Help / Re: Power steering question

« on: 26 January 2011, 19:07:45 »

Hehe, thanx.

Now just to find mehanic that want's to doo that job. As i find out from the forum and pictures here thats a tricky and hard job.

8

Omega General Help / Re: Power steering question

« on: 26 January 2011, 18:48:51 »

He told me something like there is one with electrical wire and the other one doesen't have that electric. I know when my fuse was blown due the short circuit i lost power steering

9

Omega General Help / Power steering question

« on: 26 January 2011, 18:00:54 »

Hi,
Can someone answer me what are the differences on power steering pumps on Omega B (preface lift)?

Guy on junk yard told me that i have to see first what steering pump I have. I have power steering leek somewhere underneath. My car is 1996 2.5 V6. Plate No. WOL000026V1120783 if this helps.

10

Omega General Help / Re: front hood

« on: 27 June 2009, 22:55:16 »

it's used part.

11

Omega General Help / Re: front hood

« on: 27 June 2009, 19:01:26 »

the bonnet has that line just over the hedlights that goes over whole bonnet, just like mine. i have bring it home allready an put it on the car and then noticed that. washer jets are the same like mine but i'm confused now with looks of it. first pictures are old one and than it's new.

can someone put a picture (close up) from prefacelift car here

on 2. picture you can see clearly the small curve on old bonnet!

12

Omega General Help / Re: front hood

« on: 27 June 2009, 18:04:23 »

anyone??

13

Omega General Help / front hood

« on: 27 June 2009, 16:57:46 »

hi, i bought new hood couse i wrecked the old one and now i have a question, new is more rounded at the end, beneath the windsheeld screen and old was allmost flat, what's the diference?. here are the pictures