1
Omega General Help / Re: Ignition comes on when Hazard Light is pressed?
« on: 18 January 2011, 20:18:41 »
lol 
Thanks tho for your help
Thanks tho for your help
- 22 May 2025, 02:42:40
- Welcome, Guest
News:
Welcome to OOF
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Omega General Help / Re: Ignition comes on when Hazard Light is pressed?
« on: 18 January 2011, 16:55:00 »
Just done a bit more research on the Net. Realised that I have put the Hazard Light Switch in the wrong way up!
D'oh!
Well, if anyone else makes the same mistake. Thats how you fix it!
D'oh!
Well, if anyone else makes the same mistake. Thats how you fix it!
3
Omega General Help / Ignition comes on when Hazard Light is pressed?
« on: 18 January 2011, 16:07:07 »
Hi Guys,
I took the original headunit out of my 2000 Omega.
I had to take off all the wood surround, this all came out fine.
Now I have put it all back when you press the Hazard Light switch the Ignition Comes On (Dash Lights Up)
The Hazard Lights do not come on though. (But they flash when car is locked/unlocked as usual)
When you press it again to switch off, the Ignition Switches off.
This happens without the key in the Ignition.
Any help would be greatly appreciated, i'm really stuck with this one!
Thanks in advance.
I took the original headunit out of my 2000 Omega.
I had to take off all the wood surround, this all came out fine.
Now I have put it all back when you press the Hazard Light switch the Ignition Comes On (Dash Lights Up)
The Hazard Lights do not come on though. (But they flash when car is locked/unlocked as usual)
When you press it again to switch off, the Ignition Switches off.
This happens without the key in the Ignition.
Any help would be greatly appreciated, i'm really stuck with this one!
Thanks in advance.
4
Omega General Help / Omega 2.2 Turbo diesel Thermostat Housing help..
« on: 04 January 2011, 16:43:54 »
http://www.flickr.com/photos/57922317@N08/5323616583/
Hi Guys,
Haven't had a Saab for a while now. Had to get rid of the old 9-5 when the Turbo went on it
Recently aquired a Omega 2.2 turbo diesel
At Clackets Lane Services last night, it decided to pop a Rad Hose and Dumped all the water out (that problem is sorted now)
Called out the AA, on inspection he noticed one of the hoses that leads from the Thermostat Housing was leaking.
The Plastic bit the hose slides over has broken, the AA guy said it was only for the Oil Cooler and I could run the car without too much trouble if I could not afford to get a new housing for a while.
Would like to find out what that pipe is for, please could you let me know. Help is much appreciated.
Follow Link for Pic
Cheers
Hi Guys,
Haven't had a Saab for a while now. Had to get rid of the old 9-5 when the Turbo went on it
Recently aquired a Omega 2.2 turbo diesel
At Clackets Lane Services last night, it decided to pop a Rad Hose and Dumped all the water out (that problem is sorted now)
Called out the AA, on inspection he noticed one of the hoses that leads from the Thermostat Housing was leaking.
The Plastic bit the hose slides over has broken, the AA guy said it was only for the Oil Cooler and I could run the car without too much trouble if I could not afford to get a new housing for a while.
Would like to find out what that pipe is for, please could you let me know. Help is much appreciated.
Follow Link for Pic
Cheers
5
Omega General Help / Help Needed!
« on: 19 September 2008, 18:32:22 »
Hiya guys and girls
I have just got my new omega 2.5 v6 auto cdx which is so lovely to drive and clean...But sady i started the car after work and it sounds like a tank as it got a leak from the drives side manfold at the back off it
I have tryed taking the manfold off myself but the bolts are going to snap tho so i was just asking if there anythink on the market which i can buy and use?as i have phoned a few places and they are saying to do the job around (£250ish) i have the gasket allready only a tenner lol... And one place told me if any the bolts snap it means that side off the head will need to be taken off and new bolts retapped and it will cost alot more then
So if anyone could plzs help in anyway pm me or post back on here!
marty
I have just got my new omega 2.5 v6 auto cdx which is so lovely to drive and clean...But sady i started the car after work and it sounds like a tank as it got a leak from the drives side manfold at the back off it
I have tryed taking the manfold off myself but the bolts are going to snap tho so i was just asking if there anythink on the market which i can buy and use?as i have phoned a few places and they are saying to do the job around (£250ish) i have the gasket allready only a tenner lol... And one place told me if any the bolts snap it means that side off the head will need to be taken off and new bolts retapped and it will cost alot more then
So if anyone could plzs help in anyway pm me or post back on here!
marty
6
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 21:17:55 »
Very ture...as it got unmarked electric leather seats interior,electric heated seats even in the back which is odd,cruise control,never been smoked in...so i will put a new clutch i think as i really like it thanks again
7
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 21:02:15 »
But guys thanks for all ur replys and help
8
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 20:03:37 »
Sady no access to the equipment i wud need to do the work .....its a lovely car tho so its best to sell it then for bits or parts :-/
.....its a lovely car tho so its best to sell it then for bits or parts :-/
9
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 19:49:51 »
well no oil leaks around the bell housing or under the car which is park on the drive so not really sure wot to do with it now sell it or get it fixed mmmmmmm wot to do :-/
10
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 19:12:34 »
I have find it harder to get it into gear when cold but its not slipping when cold only when warm and it gets easy to get into gear when warmer tho....so maybe it need bleeding :-/
11
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 15:39:49 »
So a new clutch needed then?
12
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 14:50:40 »
yes its an manual m8,but not sure about the bits u said about (replacement clutch pattern or OEM)tho tunnie??
And if its a hydraulic clutch is it easy to bleed(the boy)??
when i brought it had been standing for about 2 months so if its a hydraulic clutch wud that make any diffrence it being left in gear all that time and the clutch to slip in anyway?its seem ok when cold tho
And if its a hydraulic clutch is it easy to bleed(the boy)??
when i brought it had been standing for about 2 months so if its a hydraulic clutch wud that make any diffrence it being left in gear all that time and the clutch to slip in anyway?its seem ok when cold tho
13
Omega General Help / Re: In need off abit off help?!
« on: 07 April 2008, 14:27:30 »
yes the bite point is high m8....i think its a cable clutch to but not sure tho
14
Omega General Help / In need off abit off help?!
« on: 07 April 2008, 13:06:39 »
Hi guys...i need abit off help as last week i brought my 1st omega on a 1994 M reg 2.0i 16v CD but this morning on the way to getting it mot'd the clutch started slipping!! so am not sure if u can adjust the clutch cable or do i need a clutch fitted?its got 149k on the clock and had a new clutch fitted at 104k so not really sure wot to do with it now HELP IF anyone can thanks
marty
marty
15
Newbie Welcome Area / Thanks
« on: 02 April 2008, 08:30:58 »
I wud like to say thanks to all who said hi and welcome
Pages: [1] 2