1
Omega Electrical and Audio Help / Re: coolant sensor
« on: 04 July 2007, 18:53:38 »
Thanks fellas
- 22 July 2025, 01:13:27
- Welcome, Guest
News:
Please check the Forum Guidelines at the top of the Newbie section
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Omega Electrical and Audio Help / coolant sensor
« on: 03 July 2007, 20:12:35 »
Hi all, Have a coolant low warning on my car, so I changed the coolant following Tunnies Coolant Flush & Change in the Maintenance Guides on this forum. But I'm still having the warning on the dash.
Q: Could it now be a faulty sensor or broken wire which is the problem?
If it is the sensor, Where is it situated on the engin and could I easily check it or change it?
Any help would be appreciated
Thanks Daisy
Q: Could it now be a faulty sensor or broken wire which is the problem?
If it is the sensor, Where is it situated on the engin and could I easily check it or change it?
Any help would be appreciated
Thanks Daisy
3
Omega General Help / Re: Warm start probs
« on: 10 May 2010, 22:33:10 »
Thx for your posts I'll get the dude with the reader to have a look.
4
Omega General Help / Re: Warm start probs
« on: 09 May 2010, 16:16:00 »
Thought of that, theres a guy I know up the road who can help. Just wondered if the was a common fault or something I could check in the meanwhile. Thx
5
Omega General Help / Warm start probs
« on: 07 May 2010, 23:17:10 »
Hi
Have a 2.2 (2000yr) auto and have found recently that when I start the engin when its warm I sometimes have a mis-fire for a split second and then a auto box check warning. If I turn the engine off and start it again its normally ok. I have no probs when cold. Any help is appreciated Thanks
Have a 2.2 (2000yr) auto and have found recently that when I start the engin when its warm I sometimes have a mis-fire for a split second and then a auto box check warning. If I turn the engine off and start it again its normally ok. I have no probs when cold. Any help is appreciated Thanks
6
Omega General Help / Re: locking wheel nuts!!!!
« on: 07 May 2010, 22:48:07 »
Hi
Had the same prob last year.
How to sort it out...... Get a small chisle and gently tap around the anti tamper ring around the locking nut, you`ll see the ring start to come away from the nut. Now use a pin nose plyers and start to pull the ring off. Two to three mins and the ring should be off. Now find a socket just smaller than the remaining nut and tap it over the nut( tight fit is required) Now with your tyre wrench undo the nut. If it slips either the socket is to lose or you need to drive it on more. Took me five mins for the first one then about ten min for the other three. Good luck
Had the same prob last year.
How to sort it out...... Get a small chisle and gently tap around the anti tamper ring around the locking nut, you`ll see the ring start to come away from the nut. Now use a pin nose plyers and start to pull the ring off. Two to three mins and the ring should be off. Now find a socket just smaller than the remaining nut and tap it over the nut( tight fit is required) Now with your tyre wrench undo the nut. If it slips either the socket is to lose or you need to drive it on more. Took me five mins for the first one then about ten min for the other three. Good luck
8
Omega General Help / Re: wheel locks
« on: 06 May 2009, 20:50:47 »
what is this wheel nut remover and how does it fit over the locking nut?
9
Omega General Help / wheel locks
« on: 06 May 2009, 19:27:39 »
Hi, tried to take me wheel of today ( another flat ) and managed to bust my security bolt adapter. Its the three pin type vauxhall part no 91138778. Any ideas where to get one. Tried the web ebay etc frf
10
Omega General Help / Re: Dashboard gauges just stopped working!! HELP!!
« on: 26 April 2009, 11:03:17 »
I found it was not fues 14 that had blown, but fuse 15.
My car is a 2.2 cd auto ( 2000 yr) if that makes any differents
My car is a 2.2 cd auto ( 2000 yr) if that makes any differents
12
Omega General Help / Sick feeling
« on: 23 April 2009, 21:18:42 »
Oeck! Real bad news for me tonight, found out me timing belt is a gonna, anyone out there had this happen? any ideas what damage could have happened and how much to repair??? (Only done 25k since belt change 3 yrs ago)
14
Omega General Help / cam and crank sensor troubles
« on: 22 April 2009, 20:14:12 »
Hi, I had an auto elec dude look at me car today, told me the crank sensor is iffy,, also told me it might be worth changing the cam sensor while I'm at it. Any ideas how I can do this for both sensors( 2.2 y22xe engin ) . Thx Daisy
15
Omega General Help / Re: Engin stalled not firing
« on: 21 April 2009, 22:31:17 »
Thx for replys, is it a had job to rplace the crank sensor and any ideas how much 4 one?
Pages: [1] 2