Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: TIMING BELT

« on: 14 November 2009, 18:11:35 »

Ok yeah sure i will put all the anchilleries of the 2.6 over to the 2.5

thanks for all the advise
have a great evening

2

Omega General Help / Re: TIMING BELT

« on: 14 November 2009, 18:06:34 »

dbw gubbins ?

3

Omega General Help / Re: TIMING BELT

« on: 14 November 2009, 18:04:30 »

Ok counted the teeth on mine it is also 225 and widt is also 30 so i think i will give it a go i am sure it will work will just have a look at the tensioners

thanks guy's have a good night

4

Omega General Help / Re: TIMING BELT

« on: 14 November 2009, 17:58:49 »

No the 2.6 engine is a gonner so i am going to have to put the complete 2.5 engine in but as i mentioned the timing belt doesn't look to well so i whould like to change it for peace of mind

5

Omega General Help / Re: TIMING BELT

« on: 14 November 2009, 17:46:33 »

NO UNFORTUNATELY THE Y26SE IS TOAST    BEARINGS
NON FUNCTIONING OIL PUMP I JUST READ THAT THE Y26SE HAS 225 TEETH AND THE WIDTH IS 30 SO I GUESS IF I COUNT MINE AND IT IS THE SAME IT SHOULD WORK

6

Omega General Help / TIMING BELT

« on: 14 November 2009, 17:37:28 »

HI GUY'S

WANT SOME ADVISE IF SOMEONE COULD MAYBE HELP ME I AM IN SOUTH AFRICA AND HAVE THE 2002 OPEL OMEGA 2.6 V6 BUT I HAD TO REPLACE THE ENGINE AND THE ONLY ONE I COULD FIND WAS THE X25XE INSTEAD OF THE Y26SE AND I WANT TO CHANGE THE TIMING BELT AND TENSIONERS BUT THAT ENGINE WAS AN IMPORT ENGINE AND THERE IS NO AFTER MARKET PARTS AVAILIBLE FOR IT SO MY QUESTION IS WILL THE Y26SE TIMING BELT WORK ON THE X25XE ENGINE THE ENGINE NUMBER IS X25XE08051639 WHOULD APPRECIATE ANY HELP THANKS GUY'S

DESPERATE

7

Omega General Help / FIRING ORDER 2.6 V6

« on: 11 October 2009, 14:46:08 »

HI EVERYONE COULD SOMEONE MAYBE TELL ME WHAT THE FIRING ORDER IS FOR THE OMEGA 2002 2.6 V6

8

Omega General Help / Re: SPECS ON OMEGA 2.5 X25XE

« on: 10 February 2009, 07:56:39 »

HI DTM THANKS FOR THE INFO

I KNOW YOU SAY USE NEW HEAD BOLTS BUT I AM IN SOUTH AFRICA AND THERE IS NO SPARES AVAILIBLE FROM DELTA OPEL OR NO AFTERMARKET PARTS SO I GOT A GASKET SET ON EBAY WHOULD IT REALY BE A BIG ISSUE IF I USE THE OLD BOLTS

THANKS
RIAAN

9

Omega General Help / SPECS ON OMEGA 2.5 X25XE

« on: 10 January 2009, 06:34:14 »

HI GUY'S

COULD ANYONE MAYBE GIVE ME THE SPECS ON THE 2.5 V6 OMEGA X25XE 98 ONWARDS  HAD A BLOWN HEAD GASKET BUSY FIXING NEED TO KNOW HOW MUCH TO TORQUE USING OLD HEAD BOLTS

THANKS GUY'S

10

General Discussion Area / Re: DESPERATE ADVISE NEEDED ON 2.6 V6 OMEGA

« on: 30 April 2008, 15:00:21 »

Thanks kevin

Realy appreciate the info i think it might just work will the 2.6 cam covers work on the 2.5 heads you think ?  coils i will source i am sure someone will ship those over to me they aren't heavy

11

General Discussion Area / Re: DESPERATE ADVISE NEEDED ON 2.6 V6 OMEGA

« on: 30 April 2008, 13:40:00 »

Hi guy's


Thanks for all the info it seems everything is there throttle body inlet manifold injectors etc etc all that i can see that is missing is the coils so if i buy that 2.5 v6 you guy's recon everything should fit i whould just have to find some coils a gasket set and i should be alright.  I just want to make sure the the heads are identical to the 2.6 version if i have all anchilleries it whould work ?

12

General Discussion Area / Re: DESPERATE ADVISE NEEDED ON 2.6 V6 OMEGA

« on: 29 April 2008, 16:39:09 »

Contact a UK or German breaker and get one shipped over

HI THANKS FOR THE ADVISE GUY'S COULD ANYONE PUT ME IN CONTACT WITH A BREAKER THAT COULD MAYBE HELP ME WITH SHIPPING ONE OVER BEACOUSE I TRIED CHATTING AND CONVINCING A FEW OVER EBAY AND NONE SEEM TO WANT TO HELP ME  ITS A STRUGGLE FROM BEGINNING TO END IF I CAN JUST GET ONE THAT WILL BE WILLING TO SHIP ME ONE I HAVE FOUND OUT THAT IT'S ABOUT 3 AND A HALF POUNDS PER KILO TO BRING IT OVER AND ENGINE WEIGHS ABOUT 175 KILOGRAMS SO IF ENGINE GOES FOR ABOUT 400 POUNDS + SHIPPING FEES TOTAL COST WILL BE ABOUT 900 POUNDS  WHICH IS STEEP BUT WORTH IT TO ME BEACOUSE I REALY LIKE THIS CAR A HELL OF ALOT   SO PLEASE IF ANYONE KNOWS OF SOMEONE THAT WHOULD BE WILLING TO HELP ME PLEASE LET ME KNOW  

13

General Discussion Area / DESPERATE ADVISE NEEDED ON 2.6 V6 OMEGA

« on: 29 April 2008, 15:51:00 »

HI GUY'S

I HOPE SOMEONE CAN GIVE ME SOME ADVISE I AM NEW TO THIS FORUM I AM FROM SOUTH AFRICA AND RECENTLY BOUGHT AN OPEL OMEGA 2.6 V6 2002 Y26SE ON AN AUCTION NOT KNOWING IT WAS A VERY SCARCE MODEL OF CAR IN SOUTH AFRICA AND THE ENGINE IS NOT RUNNING IT HAS BEEN STRIPPED AND QUITE A FEW PARTS ARE MISSING AND A COMPLETE OVERHAUL IS NECESERRY ASWELL SO YEAH I STARTED LOOKING FOR A REPLACEMENT ENGINE AND LOW AND BEHOLD JUST AS DIFICULT TO FIND AN ENGINE AS IT WAS TO FIND SPARES THERE IS ONE I CAN GET STILL A BIT STEEP BUT MIGHT BE WORTH IT  THAT BRINGS ME TO MY QUESTION THE ENGINE I CAN FIND IS THE 2.5 V6 X25XE ENGINE WHOULD IT WORK IN THIS CAR AND WHOULD THERE BE A LOT OF MODIFICATIONS NEEDED ?  EXAMPLE FUEL MANAGEMENT SYSTEM WHOULD I HAVE TO FIND ONE  OF THE X25XE MOTOR OR CAN I MAKE THE EXISTING ONE WORK HOW ABOUT THE GEARBOX WHOULD IT FIT WHITHOUT MODS
AND THE PLUGS FOR ALL THE SENCORS ETC WHOULD THEY ALL WORK AND FIT
PLEASE GUY;S IF ANYONE COULD GIVE ME SOME ADVISE ON THIS I WHOULD GREATLY APPRECIATE IT ALOT       DESPERATE  SOUTH AFRICA