Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - andy69

Pages: [1]
1
Omega General Help / ignition barrel
« on: 10 July 2010, 17:57:32 »
Hi can anyone help, I've got a 2003 2.6 v6 cdx omega, the problem is I've just gone to start it up and the key will not turn in the ignition. Any ideas what this might be.
Thanks
Andrew

2
Omega General Help / Re: HELP I NEED A AUTO SELECTOR SWITCH
« on: 29 June 2009, 05:25:16 »
HI
from underneath the car it is on the lefthand side of the gearbox, if you you at this link it will show you what it looks like http://www.omegaowners.com/forum/YaBB.pl?num=1231586488
Thanks
Andy

3
Omega General Help / HELP I NEED A AUTO SELECTOR SWITCH
« on: 28 June 2009, 19:13:44 »
HELP

I've got a 03 2.6 v6 omega saloon and i despartely need a new selector switch, I have cleaned the old one up a couple of times but today it seems to have finally given up the ghost. Can anyone help please.

Thanks

Andy69

4
Omega General Help / handbrake
« on: 01 April 2009, 22:20:49 »
Hi I'm sure this question has been asked before but how do you adjust the handbrake on a 2003 2.6 v6 saloon. It,s just the mot is coming up on saturday

5
Omega General Help / Re: transmission trouble
« on: 12 February 2009, 21:15:57 »
THANKS FOR ALL OF YOUR HELP I NOW HAVE A FULLY FUNCTIONAL GEAR SELECTOR AGAIN :D

6
Omega General Help / Re: transmission trouble
« on: 10 February 2009, 18:12:01 »
thanks for all of the help I haven't been able to get out untill today because of the snow. I went to get some contact cleaner and on the way the maintenance light and traction control light came on,but they've now gone out again I'm guessing as a result of a dodgy switch, is it worth trying to take it apart and clean it or should I cut to the chase and replace it. Also with regards to the atf fluid is it just a case of draining it the re-filling until it begins to run out of the filler hole.
Thanks

Andy

7
Omega General Help / Re: transmission trouble
« on: 08 February 2009, 12:10:05 »
thanks for that I've got access to a pit what am I looking for, is there anything like a haynes manual for the omega

8
Omega General Help / transmission trouble
« on: 07 February 2009, 12:00:46 »
HI

I wonder if anyone can help I,ve got a 2.6 v6 cdx on an 03 plate recently when i've tried to select a gear all the lights on the display come on and it takes a while for it to go into the gear that I've selected any ideas whats wrong

Thanks

Andrew

9
Omega General Help / Re: stiff ignition key
« on: 09 July 2008, 15:07:24 »
sometimes I have real prblems turning it

10
Omega General Help / Re: stiff ignition key
« on: 09 July 2008, 15:05:15 »
Quote
hi

I,m new on the site I have an 03 omega 2.6 v6 cdx saloon and I sometimes have trouble turning the ignition key, does the barrel just need oiling.

Thanks

Andrew :-X
sometimes it prevents me from turning it

11
Omega General Help / stiff ignition key
« on: 09 July 2008, 09:09:47 »
hi

I,m new on the site I have an 03 omega 2.6 v6 cdx saloon and I sometimes have trouble turning the ignition key, does the barrel just need oiling.

Thanks

Andrew :-X

Pages: [1]

Page created in 0.009 seconds with 14 queries.