Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / heater vents problem

« on: 13 November 2008, 11:43:34 »

i have a 1998 2.5 v6 omega and the heater vents have stopped working except the one for the windscreen. anyone tell me whats wrong?. HELP WINTERS HERE AND I'M FROM SCOTLAND BRRR

2

Omega General Help / ecu on steering column

« on: 02 October 2008, 11:09:12 »

if i fit a used ecu on the steering column do i have to get it recoded, dont have car pass so what do i have to do to get one and what documents would i have to take to the dealer. car is omega 2.5 v6 1998. HELP

3

Omega General Help / Re: changing key chips

« on: 01 October 2008, 22:12:28 »

im in banff, aberdeenshire, scotland. im afraid

4

Omega General Help / Re: changing key chips

« on: 01 October 2008, 20:38:45 »

i only have the one, what about the cracked ecu on the steering should i replace that with the used one i sourced or what should i do

5

Omega General Help / Re: changing key chips

« on: 01 October 2008, 18:42:47 »

car would not start but took out battery and charged it, put it back in and after a lot of cranking it started, then it ran perfect for three or four weeks and went out saturday and would not start orange light flashes after i crank it for a while, but the ecu in the steering column has a big crack in the box part of it.

just got it mot'd three weeks ago, bought it secondhand six weeks ago, great car dont wnt to scrap it. HELP

6

Omega General Help / Re: changing key chips

« on: 01 October 2008, 16:57:22 »

 transponder on steering column was broken, was told by garage i would have to change that plus immobiliser is this true

i have a immobiliser, have sourced used one with key. how do i ghange the chip from one key to the other and will i have to do anything else to start the car. its omega 2.5 v6, 1998.

7

Omega General Help / Re: changing key chips

« on: 01 October 2008, 16:52:33 »

i have a immobiliser, have sourced used one with key. how do i ghange the chip from one key to the other and will i have to do anything else to start the car. its omega 2.5 v6, 1998.

Engine ECU is tied to immobiliser.  Keys are tied to immobiliser.  So engine ECU, Immobiliser ECU, and transponders in keys all need to be paired up with each other.

What was wrong with original immbiliser>

8

Omega General Help / changing key chips

« on: 01 October 2008, 15:32:38 »

i have a immobiliser, have sourced used one with key. how do i ghange the chip from one key to the other and will i have to do anything else to start the car. its omega 2.5 v6, 1998.