Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / pulling to one side

« on: 21 November 2012, 15:38:34 »

my omega 2.2 cd is pulling to the left when i brake i have had the tracking checked and its fine also had discs and pads checked they are fine.no play or wobble in the wheels when it was on the ramps everything is solid. i had one front anti roll bar fitted in aug to get it through mot which it passed.so at the moment when i brake i have to correct the steering to the left and sometimes it stays like that for a while and then flicks back so the steering wheels is straight again very confused omega owner here anyone got any ideas what it could be . im wondering if on pad is not pushing on the disc so it feels like the wheel is not running straight i had to replace the left tyre as it was worn nearly bald on the out rim . i would be grateful for any advice or tips thanks

2

General Discussion Area / Re: value

« on: 16 November 2012, 13:07:15 »

might just break it then its had a brand new cat fitted about four months ago that was 248quid lol probably worth more than the car

3

General Discussion Area / value

« on: 14 November 2012, 15:20:40 »

hi all im just wondering if anyone has an idea of the value of my old faithful omega cd auto 2.2 petrol 2001 colour gold condition is ok.

4

Omega Electrical and Audio Help / dashboard warning lights

« on: 06 September 2012, 19:38:33 »

i have got the small display of the car with a spanner through it comming on now and then but it still runs fine i got the 2.2 petrol auto of a 51 plate

5

Omega Electrical and Audio Help / Re: radio

« on: 09 February 2012, 19:29:28 »

its got the cdr 2005 and i dont have a spare the car was scrapped as a runner he took the lot

6

Omega Electrical and Audio Help / Re: radio

« on: 09 February 2012, 19:23:06 »

where can i find the code for the radio as i have not got any manuals with it at all iv got an old one from a scrapped omega i had but the radio is different model

7

Omega Electrical and Audio Help / radio

« on: 04 February 2012, 19:04:19 »

what does it mean when my radio says safe and i cant turn it on properly please

8

Omega General Help / Re: crank seals on 2.5 v6

« on: 16 November 2011, 19:30:58 »

original cam covers

9

Omega General Help / Re: crank seals on 2.5 v6

« on: 14 November 2011, 20:28:50 »

who is Darth Loo-knee and where do i find them lol sorry not used this much iv had a right nightmare with this a mechanic friend told me it was my rockers gaskets then it was my rockers so had them all changed and while at it plugs a filters changed and i find my oil leak is worse and he has left the country must of known i was angry been told its the crank seals but not one hundred % the oil is coming from the front and its low any ideas if this is the case or could it be something else

10

Omega General Help / crank seals on 2.5 v6

« on: 14 November 2011, 20:10:09 »

has anyone got any good diagrams of how to change the cranks seals on my 2.5 v6 please i think iv got a leak coming from the bottom crank as the rest all seems dry and the belt is dry to

11

Omega General Help / 2.5 v6 rocker covers changing

« on: 30 August 2011, 10:03:42 »

hi how hard is it to replace the rocker covers i had the gaskets done and all oil and filters plugs and breathers cleaned on to find that the rocker cover had warped so got new ones and have been let down by my mechanic im not to bad with spanners basic level only so want to know if there are any major head aches to look out for while doing this job

12

Omega General Help / starting problems

« on: 08 June 2010, 14:41:29 »

hi guys i have just bought a omega cd v6 everything is good apart from one thing every now and then after i have been out in it for a run i go back to it and it wont start as though its not firing it will go in the end after roughly half an hour also how do i check to see if the cam belt needs changing i believe these have got 2 belts do i need to change them both thanks guys for any advice you can give me cheers steve