6
« on: 29 March 2009, 17:25:55 »
Right found a really easy way to remove the crank sensor , first undo 4 8mm nuts securing the sump guard on the passenger side and that side will then drop down , if you shine a torch into the side of the gearbox your see the crank sensor , now using a 2ft extension and a small socket you can easily remove it ..
Now i did this , this morning and removed it to see if i could clean it or see any damage . now i cleaned it up and theres no sign of damage but as i dont have a new one to look at i dont know if its ok , on the bottom theres a small round metal part which i take it sends the sginal but after looking i dont know if this little metal section should stick out the plastic sensor a little as mine is nearly flush and also i noticed 3 tiny grooves in it which go onto the plastic too , now without looking at a new one im not sure wether there supposed to be there
Does anyone know if the bottom of the sensor which sits inside the box should be smooth or wether it has marks
