Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - davedmc

Pages: [1]
1
Omega General Help / cruise control 2002 omega petrol 2.2
« on: 03 April 2009, 09:59:36 »
is adding cruise control as simple as changing the stalk and enabling the ecu, the car is auto so no clutch switch?? are there different switches or will any facelift model switch do, i'm assuming the car is fly by wire so no gubbins under the bonnet to add?? Thanks Dave.

2
Omega General Help / Re: omega 2.2 cam sensor fault/gearbox
« on: 01 April 2009, 21:24:05 »
you're not kidding, both sensors were brand new out of the box, i could understand 1 being faulty but not 2 hence the reason we started looking at other possible cures, Dave.

3
Omega General Help / Re: omega 2.2 cam sensor fault/gearbox
« on: 01 April 2009, 21:09:45 »
just an update, checked the timing, all ok, turns out the 2 cam sensors we tried were none genuine items, fitted a genuine vx part today which has cured the problem, if anyone else has the same problem, don't fit any sensors unless they're genuine, might look at a gas conversion now?? Thanks for your input, Dave.

4
Omega General Help / Re: omega 2.2 cam sensor fault/gearbox
« on: 27 March 2009, 19:44:03 »
has been plugged in with a tech 2, first cam sensor was spurious, we sent that back thinking it was faulty and fitted a genuine vx part, the wheel has been checked and all the wiring checked and double checked, the car is currently in the garage i use for all my plug ins and technical stuff, i am in the Wigan area, i'm under the impression that the gearbox shuts down when there's an engine fault, gearbox ecu is just a wild stab in the dark but i'm pretty sure the box will come back to life when we sus the cam sensor out, could it be reading wrong and need a crank sensor?? Thanks, Dave.

5
Omega General Help / omega 2.2 cam sensor fault/gearbox
« on: 27 March 2009, 13:24:49 »
i have an omega 2.2 petrol auto, the car has been plugged in and is showing a cam sensor fault, the sensor has been changed ( twice ) but the fault is still there, the wiring is all good so the problem was deemed to be the ecu, 2 ecu's later and still the same problem, the gearbox is in limphome ie seems to be setting off in second gear, the sport light isn't flashing but doesnt light up when the button is pressed, could the gearbox ecu be at fault, if so is this putting the cam sensor fault up, unlikley i know but i'm running out of idea's, the car has only done 30 000 miles so mechanical failure is unlikley, in my mind the engine ecu is good, as said all 3 ecu's show the same fault, none seem to take the box out of limp home, we were assuming the gearbox has shut down because of the cam sensor fault, anyone else had the same problems, i posted this question earlier in the wrong section, newbie obviously! Thanks in advance for your help, Dave.

Pages: [1]

Page created in 0.006 seconds with 14 queries.