Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega Electrical and Audio Help / Re: dvd player lazer problems?

« on: 23 April 2009, 14:30:51 »

I mite be stating the obvious but have you tried a dvd/cd cleaning disc :-/

the other thing to try would be take the cover off and clean the lazer with some alcohol on a cotton bud :-/

hope this helps

NO !  Never use chemicals if cleaning a laser with a cotton bud

It will damage the surface coating

 

Sorry something i was told to do :-/

Will remember not to do this in future

2

Omega Electrical and Audio Help / Re: dvd player lazer problems?

« on: 23 April 2009, 10:44:42 »

I mite be stating the obvious but have you tried a dvd/cd cleaning disc :-/

the other thing to try would be take the cover off and clean the lazer with some alcohol on a cotton bud :-/

hope this helps

3

Omega Electrical and Audio Help / Re: big sound system

« on: 21 April 2009, 10:58:06 »

you ant beat a bit of bass

When i had my carlton gsi it had

 12" solo barick
 2 x 12" Kicker comps
 Vibe amps  
 components in the front
 2 x TV's
 dvd player
 and a play station

sounded like you were in the cinema!

4

Omega General Help / Re: WHAT HOSE IS THIS...

« on: 24 April 2009, 14:34:40 »

Your getting there keep trying

5

Omega General Help / Re: Is it Legal?

« on: 21 April 2009, 15:26:11 »

as far as i know as long as the two fronts are the same and the two rears are the same the fronts and rears dont have to be the same :-/

dont quote me on this tho

6

Omega General Help / Re: Valve seal removal

« on: 22 April 2009, 20:27:04 »

do you mean valve stem seals?

if so last time i did a set of these i used a small screw driver to split the outer metal ring and then pulled the seal off with a pair of long nose pliers

tap the screw driver gently with a pin hammer to split the metal ring

to fit the new ones i found a socket the same size as the metal outer ring and gently taped the new ones on

hope this helps

7

Omega General Help / Re: MV6 Suspension

« on: 22 April 2009, 08:57:01 »

no problem  

8

Omega General Help / Re: MV6 Suspension

« on: 21 April 2009, 14:20:58 »

Im not sure if it will fit but i have a 2.5 V6 on a p reg estate!

if it will fit then i will be up for swaping

9

Omega General Help / Re: Diff Question????

« on: 22 April 2009, 08:55:42 »

thanks guys

10

Omega General Help / Diff Question????

« on: 21 April 2009, 15:22:00 »

Can anyone tell me is an Auto Diff any different from a Manual Diff? :-/

reason for my question is im converting my 2.5V6 from auto to manual and im unsure if i need to change the diff :-/

11

Omega General Help / Re: Starting Problems

« on: 21 April 2009, 13:34:55 »

if above does not cure it the it may be an imobiliser problem :-/

12

Omega General Help / Re: transplant

« on: 20 April 2009, 22:14:38 »

Correct me if im wronge but your vectra is front wheel drive?

the omega is rear wheel drive!

if you give this some thought your gear box is on the right hand side of
your engine, the omega gear box is on the back of the engine! :-/

i guess you could convert your vectra to rear wheel drive

13

Omega General Help / Re: Removing front bumper

« on: 20 April 2009, 16:13:05 »

if i remember correctly they screw intometal clips! try a little leaverage behind the screw as you turn it!

hope this helps

14

Omega General Help / Re: interior cleaning?

« on: 09 April 2009, 15:36:39 »

I always use baby wipes on the plastic trims! works a treat and there not expensive!

on the seats i always take them out of the car clean them with washing powder in warm water with a nail brush! then leave them in the sun to dry

Alot of work but the results are fantastic and again not expensive

Hope this helps :-?

15

Omega General Help / Re: Sunroof

« on: 09 April 2009, 15:45:22 »

On the panel with the switch you use to close the roof there is a U shaped plastic cover! remove this by sliding it!

you will find the manual winding mech in there! use a large flat screwdriver to turn it and the roof will close

Hope this helps