cam sensor is GM fitted by myself following guide from this forum. When started car seems to be missing, putting foot to the floor revs just die and engine cuts out rev counter needle sticks and jumps to higher revs not a smooth sweep of the needle.
friend of a friend has had a tech 2 hand unit on car first of all it came up with lambda fault changed both then cam sensor changed that and did full service inc fuel filter . Now the word is ecu but not from tech 2 from friend of a friend (is he a friend)
My 2.2cdx estate has been playing up for a while very poor starting from cold. I have changed lambda sensors, cam sensor and a full service has been done. Still the problem persists. In a final attempt to solve this problem i have been told to change the ecu not willing to purchase from new so second hand is my option is it easy to swap any is it just a case of one out one in with no hassle? PLEASE HELP.......
does anyone know wher the external temp sensor is located ? is it easy to replace? my display says 65c and slowly counts down have looked but cant see sensor, anyone got a piture of one? so i know what to look for thanks
omega 2.2 cdx estate petrol. Two codes come up on mates code reader co300 and co700 anybody got any ideas. Starts great when hot, but is a bag of to start from cold.
the code reader was mac tools guy at the garage said it came up with the code CO700 but he was unable to tell me what the code referred to. I would go to the local arnold clarke vauxhall dealership but have lost faith in them over past problems. Any help would be greatfully accepted
th guy at the garage where i took my omega assured me that the only codes he found were old faults and that all sensors were working as they should, he then cleared all of the stored codes. Will get car back to him to read this new fault code next week. many thanks