Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: which is cylinder 2 on v6 engine

« on: 30 July 2009, 18:46:49 »

thanks all how do i check the connection of the injector, is there much stripping to do?

2

Omega General Help / which is cylinder 2 on v6 engine

« on: 30 July 2009, 15:07:15 »

which is cylinder 2 on v6 engine

3

Omega General Help / Re: omega v6 3.0l 1996 fault code 82

« on: 30 July 2009, 18:48:31 »

thanks is it easy to check the connection

4

Omega General Help / Re: omega v6 3.0l 1996 fault code 82

« on: 30 July 2009, 18:42:53 »

is no 2 cyl front left bank?

5

Omega General Help / omega v6 3.0l 1996 fault code 82

« on: 30 July 2009, 14:36:57 »

just checked fault code and it is saying 82 does anyone know what that is and how to fix
cheers

6

Omega General Help / Re: Rough running/Misfire

« on: 29 July 2009, 17:01:42 »

you need to do the pin test if you look you can find out how in maintance section. do you have oil in spark plug wells. if so get it out and replace plugs.

7

Omega General Help / Re: cutting out prob

« on: 29 July 2009, 15:10:35 »

just fitted mass air sensor and a new spark plug at the front
mow it is all over the place reving up then nothing good thing though its idling albut rough.
its going to the local garage then scrap yard if they cant sort it anyone intersted in breaking it if they cant get it going

8

Omega General Help / cutting out prob

« on: 29 July 2009, 12:34:53 »

still cant find whats wrong cars fine when first starts up the when it warms up and the revs drop it idles for about 2 minuets then dies i have fitted 2 non vaux crank sensors and have looked at the idle valve and it is clean i have bought a mass air sensor and just about to fit. there is no oil
in spark wells if this dont work anyone want to buy a elite with leathers and 90k help

9

Omega General Help / Re: 3.ol v6 cutting out hellllllllp

« on: 28 July 2009, 20:10:11 »

yes i have checked volts its at 13.5 practicaly constant when engine is running. could it be the mass air sensor?

10

Omega General Help / Re: 3.ol v6 cutting out hellllllllp

« on: 28 July 2009, 18:37:45 »

engine light works but has never come on when it cuts out.
i fitted none vaux sensors

11

Omega General Help / Re: 3.ol v6 cutting out hellllllllp

« on: 28 July 2009, 18:35:36 »

no both are fine all is clean

12

Omega General Help / Re: 3.ol v6 cutting out hellllllllp

« on: 28 July 2009, 18:30:13 »

thanks they are dry

13

Omega General Help / 3.ol v6 cutting out hellllllllp

« on: 28 July 2009, 18:15:00 »

hi i have been pulling my hair out with this fault.
right i bought car with cracked offside manufold, but car was running fine then about 2 weeks later car started cutting out,
if im doing 70 down the motorway or driving at 30 round town.when it cuts if i floor it after about 3 0r 4 seconds it fires up and is ok for 5 or 6 miles then does the same. sometimes all the dash lights come on and i have to put it in neutral and start it. the engine light does not come on.
i have changed the crankshaft sensor twice with no change. fault code 31 come on fault code but like i say i have fitted two crank sensors. i also hve oil lack come up randomly and coolent level. and some times the fuel gage shows nothing and then reads normal. hellllp. the car is a 96 3.0l v6 elite

14

Newbie Welcome Area / Re: new

« on: 30 July 2009, 18:51:05 »

hello welcome 8-) 8-) 8-) 8-) 8-) 8-) 8-) 8-) 8-)

15

Newbie Welcome Area / Re: Newbie saying hello

« on: 30 July 2009, 18:53:06 »

welcome to miggy madness