Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega Electrical and Audio Help / Re: entering cd code

« on: 06 December 2009, 18:00:35 »

finally after many attemps managed to get radio to take cd code left ign on with radio on for 12 hours it then had code ----   but would not take code then switched radio off and held cd button and switched radio on held cd button till beep and hey presto it then took code in "normal" way.
Thanks to all for your valued help and suggestions
topsy

2

Omega Electrical and Audio Help / Re: entering cd code

« on: 30 November 2009, 19:12:04 »

hi again dave
thanks for that
tried that as my son thought that was the way to do it. I have held the button for over 30 sec NO beep and no change to screen just continues to show CD-CODE does not change to show ----<10>  <9 8 etc> .  I have tried putting in the code regardless and pressing the vol button in and holding it for atleast 15 sec, but still nowt. The only thing I can think of now is to leave the radio on for a long period without touching any buttons incase it needs to re set on a time ie 30 or 60 min, unfortunatly the mot has run out so going for a drive for over an hour is out of the question and i dont fancy leaving the car ignition on with keys in on my drive
thanks once again will let you know how I get on

3

Omega Electrical and Audio Help / Re: entering cd code

« on: 30 November 2009, 18:33:49 »

hi dave
cd did work before battery went flat as car stood for a couple of months when my son who's car it was bought a new car.
trying to get this beutiful car back on the road for myself 
thanks for your time and effort .

4

Omega Electrical and Audio Help / Re: entering cd code

« on: 30 November 2009, 18:12:52 »

hi guys
remember me still cant get bloomin radio to accept a cd code just sits on CD-CODE no beep no ---- to enter codes now im a pacient guy BUT   this is getting me down
and my miggy is a CADDY       CADILLAC CATERA  rebadged and mod'ed by my car crazy son who wants it to be diffrent

5

Omega Electrical and Audio Help / Re: entering cd code

« on: 29 November 2009, 19:55:17 »

have found it is a ccrt7000 bose on star

6

Omega Electrical and Audio Help / Re: entering cd code

« on: 29 November 2009, 19:39:21 »

hi dave
not sure of the exact model number of radio but has the built in phone, (if that helps).
when radio is switched on "normally", then cd is selected the screen shows a small cd on the line above the bottom line towards the left hand side, underneath is a 2.  more to the centre of the botton line is CD-SAFE. If I press the "cd select" button and "on" together the screen shows CD-CODE, but the radio does not beep if the cd button is held in at this point and I cannot enter the code
any thought I would be greatful.

at no point has the screen shown CDC-SAFE

7

Omega Electrical and Audio Help / Re: entering cd code

« on: 27 November 2009, 14:50:18 »

thanks very much sneakypenguin i tried that but no beep does say cd safe at first and then cd-code but thats it nothing anymore I am wondering if the cd changer has lost its memory and if it is worth while pulling the power supply to the changer only and seeing if that resets it but dont want to knack it altogether unfortunatly im a long way from you in Newcastle on Tyne   many thanks for your efforts

8

Omega Electrical and Audio Help / entering cd code

« on: 25 November 2009, 14:34:43 »

after battery problems entered the radio code and it works great but when trying to use cd changer askes for code (i have the code) but am unable to enter it have tried to press cd and on together also AS but it wont let me enter the code any ideas        99 3ltr auto elite saloon with radio and phone combined type radio  my son lost the audio manual when he borrowed the car

9

Omega General Help / dis unit 3.0 v6 elite saloon T reg

« on: 15 May 2010, 18:49:23 »

hi folks  looking for help on a mis fire checked plugs and ht leads ok one cylinder  no spark suspect dis unit but how in damn nation do you get at it to try and change it do you have to drop the engine out as i cant get my fingers down the back of the engine never mind a socket set or screw driver or has any one got a trade secret on how to easily change one
thanks in advance for help :-/

10

Omega General Help / Re: speedo failure

« on: 23 December 2009, 11:52:31 »

Hi everyone thanks for the suggestions. in answer to some of the comments  all other things seem to work ok lights radio etc, no tc light on no batt warning light on and criuse control still functions and I can set a speed on it by resetting the average speed screen and I have checked the accuracy of this by a local school speed check sign. where is the sensors that have been mentioned for sending the data for the speedo and revs would I have to physically crawl under the car to get at them to try and dry them out and seal them. the steering seems normal (power assist ok )
thanks once again for all your help

11

Omega General Help / speedo failure

« on: 22 December 2009, 10:11:01 »

can anyone help please,  returned from weekend away with out the car, started up drove about 10 mile parked on driveway ( light snow on ground,temp about -1.5 c) all ok. After about 1 1/2 hours got in started up but noticed that the rev counter and speedo not functioning, switched off and started up again and I noticed both needles gave a small jump then just remained static, as I was driving tried the average speed indicator on the small screen and that showed speed if regularly reset so i could get to 28mph and set criuse control ok. At one point the gearbox warning came on but did not affect the driving, I again switched the ign off and after a min or so started the car but speedo/rev counter still u s      most greatful of any help or suggestions  the car is a 3ltr v6 elite saloon 1999 pre facelift