Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - moose

Pages: [1] 2 3
1
Omega General Help / steamed up windows
« on: 02 December 2012, 18:52:08 »
hi all,
cannot stop the windows from steaming up,carpets dry-scuttle clear-pollen filter dry-boot vents clear???
had to wait 20 mins last night to clear,more water on inside than out >:(is there anything i missed thats causing this?

2
Omega General Help / Re: code 1612 immobiliser
« on: 27 February 2012, 15:17:30 »
the chips in both keys are secure :-[

3
Omega General Help / code 1612 immobiliser
« on: 27 February 2012, 14:27:29 »
Hi all , got code 1612 no signal or wrong signal immobiliser and car sometimes cuts out on start up with spanner/car light flashing.cant understand why it only happens sometimes but when started with throttle it fires up then runs ok.any ideas why its a random thing -happens with both keys , all ecu is ok round ignition barrel.but cant understand why its a random thing ??  >:( >:( >:(

4
Omega General Help / Re: immobiliser problem
« on: 06 February 2012, 13:09:40 »
thanks to joff, replacement battery fitted and all seems fine,will keep an eye on the EML light but so far so good.
thanks again mate  :y :y :y

5
Omega General Help / Re: immobiliser problem
« on: 06 February 2012, 12:34:26 »
ok if you dont mind that would be great ;D

6
Omega General Help / Re: immobiliser problem
« on: 06 February 2012, 12:29:43 »
hi thanks mate im in covingham sn35el (28) but will be leaving for work at 1:30.dont now if you remember me ...marcus,i had 2 coil packs off you a while back.

7
Omega General Help / Re: immobiliser problem
« on: 06 February 2012, 12:25:20 »
hi joff,,,thanks for the offer i know you are only just down the road from me but im stranded at home with a flat battery..!!
engine did start but immobiliser shut it down again.

8
Omega General Help / Re: immobiliser problem
« on: 06 February 2012, 12:04:15 »
went out started ok then battery died,,,,could a dying battery cause this.new battery today grrrrrr.

9
Omega General Help / Re: immobiliser problem
« on: 06 February 2012, 10:14:44 »
ok thanks i`ll glue it and see how it goes

10
Omega General Help / Re: immobiliser problem
« on: 06 February 2012, 10:01:49 »
hi,the chip slides in and out freely - should it be glued in ?

11
Omega General Help / immobiliser problem
« on: 06 February 2012, 08:24:34 »
hi all, my mv6 sometimes plays up on start up,the engine wont fire and the car/spanner light flashes.after a few attempts it will start and all is fine.this only happens sometimes and cant find out why.the key is fine and the ECU on ignition barrel is tight and multiplug is ok,any ideas why ????
thanks
marcus.

12
Omega General Help / Re: Fault Codes please
« on: 02 January 2012, 18:02:47 »
Thanks guys i`ve been having trouble with the connections in the key ,,got a piece of card in there to keep it tight , maybe this was the problem.
I will use the spare key for now and see if it happens again.
thanks again all,
Marcus.

13
Omega General Help / Fault Codes please
« on: 02 January 2012, 17:27:00 »
Hi all.
Got the warning light coming on sometimes when starting (car with spanner) and the engine cuts out,pedal trick shows 1613 and 1612.Any ideas please 2001 2.6 MV6 ::)
Thanks guys if its a sensor can you please also tell me where it is !!!

14
Omega General Help / Re: Oil again
« on: 02 December 2011, 00:05:27 »
2001 MV6 !! NOT 2006

15
Omega General Help / Re: Oil again
« on: 02 December 2011, 00:03:52 »
im thinking the same but no warning light on so will check filter in morning

Pages: [1] 2 3

Page created in 0.007 seconds with 13 queries.