Topic: oil cooler torque settings (Read 900 times)

MV6Danny · « **on:** 03 August 2012, 20:27:55 »

Hi can anyone tell me what the torque settings are for the oil cooler oil pipes to the oil cooler. The hollow bolts that let the oil pass through them. Cheers guys

amba · « **Reply #1 on:** 03 August 2012, 20:53:34 »

30 nm same as the large nuts that secure the actual cooler to the plate.20nm for the cooler plate.

Andy H · « **Reply #2 on:** 03 August 2012, 20:58:59 »

I printed a copy of V6 Torque Values which I keep with my torque wrench

I cannot see a figure for the oil cooler banjo bolts though

chances are it is the same figure as for the coolant bridge bolts (seeing as they are probably the same part number

). Thing is I prefer not to take chances with banjo bolts $:-\$

MV6Danny · « **Reply #3 on:** 03 August 2012, 21:26:32 »

Cheers guys. i couldnt find it on the v6 torque values either thats why i asked

dbug · « **Reply #4 on:** 03 August 2012, 23:48:33 »

Quote from: Andy H on 03 August 2012, 20:58:59

I printed a copy of V6 Torque Values which I keep with my torque wrench

I cannot see a figure for the oil cooler banjo bolts though chances are it is the same figure as for the coolant bridge bolts (seeing as they are probably the same part number ). Thing is I prefer not to take chances with banjo bolts $:-\$

No - they are different part numbers and not interchangable!! Same torque though

News:

Author Topic: oil cooler torque settings (Read 900 times)

MV6Danny

oil cooler torque settings

amba

Re: oil cooler torque settings

Andy H

Re: oil cooler torque settings

MV6Danny

Re: oil cooler torque settings

dbug

Re: oil cooler torque settings