Topic: Checking Elite Seat Heater Pads - Out of Car. (Read 959 times)

zirk · « **on:** 17 February 2013, 14:38:13 »

Need to check the Heater elements on a set of Preface Elite Leather, fronts and rears that are out of the Car?.

So armed with 12v and some croc clips, anyone know the Pins or wire colours (+/-) for checking the elements, front and back?

Thanks.

05omegav6 · « **Reply #1 on:** 17 February 2013, 15:41:29 »

MID FACE LIFT

Rears are SWRT and SWGE, return through BR.

Fronts are the same and Pins 4 and 7 respectively

PRE FACE LIFT

Wire colours the same, front and rear. Front Pins in the plug the same numbers, but seat is wired differently.

Courtesy of Messrs Haynes

Andy B · « **Reply #2 on:** 17 February 2013, 17:27:24 »

Quote from: zirk on 17 February 2013, 14:38:13

Need to check the Heater elements on a set of Preface Elite Leather, fronts and rears that are out of the Car?.

So armed with 12v and some croc clips, anyone know the Pins or wire colours (+/-) for checking the elements, front and back?

Thanks.

It'll be a break in the base mat ........... that's my guess based on fixing my Senator's & Omega's seat heating

feeutfo · « **Reply #3 on:** 17 February 2013, 20:03:57 »

It was the back on mine, and if leather, there's no pad, the wires are glued into the covers under a load of felt and foam.

News:

Author Topic: Checking Elite Seat Heater Pads - Out of Car. (Read 959 times)

zirk

Checking Elite Seat Heater Pads - Out of Car.

05omegav6

Re: Checking Elite Seat Heater Pads - Out of Car.

Andy B

Re: Checking Elite Seat Heater Pads - Out of Car.

feeutfo

Re: Checking Elite Seat Heater Pads - Out of Car.