Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Webby the Bear]

Hi guys,

As above.... is the airbox just held in by rubber gromets and after disconnecting from the bagpipe that houses the MAF... i'm assuming I can just pry up on it?

Cheers guys

[albitz]

Correct.

[Webby the Bear]

cheers albus 

[TheBoy]

Yup - 3 grommets, 2 to wing, one at bottom not far from rad.

[symes]

careful of hook part under metal pipe to bottom radiator hose

[Webby the Bear]

cheers for the help guys. box came out without too much fuss but I STILL don't have enough room to swing a 24mm wrench on to the bottom EGR pipe bolt. adjustable wrench head is too thick to sneak between the pipes  ill have to get a short 24mm from somewhere.

ps, that lower snorkel from the air box... is that the tube that sticks up an lives just above the washer fluid tank... looks like a trumpet? lol presuming that's where the air comes in 

[omega3000]

cheers for the help guys. box came out without too much fuss but I STILL don't have enough room to swing a 24mm wrench on to the bottom EGR pipe bolt. adjustable wrench head is too thick to sneak between the pipes  ill have to get a short 24mm from somewhere.

ps, that lower snorkel from the air box... is that the tube that sticks up an lives just above the washer fluid tank... looks like a trumpet? lol presuming that's where the air comes in 

Aye