Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[minifreek]

I got given the plenum off a longnose 3.2, I know it lines up and would bolt to the 2.5 shortnose I have in my elite but the dual ram system doesn't line up. Would it just be a case of getting some silicone hoses and connect them from the dual ram and onto the plenum... would there be an advantage maybe or would it reduce the power...?

[05omegav6]

Not that straightforward...

You also need the following:

throttle cable from long nose 3.0.
both 90° pipe from either a 3.0 long nose or any 2.6/3.2

Then it will fit perfectly

[Webby the Bear]

Plus, wasn't the long nosed plenum designed to create more power... thus swapping it would reduce efficiency?

[Webby the Bear]

ignore that comment.... its the other way round. Back to school 

[minifreek]

So its worth putting on then...?

Im sure I can get hold of a throttle cable froma scrappies and possibly the 90 bends too...

Thanks for the quick replies folks

[RobG]

You`ll also need the Idle control valve air pipe and the multiram switch unit to throttle body air ducts.

[05omegav6]

You`ll also need the Idle control valve air pipe and the multiram switch unit to throttle body air ducts.

Or 90° pipes if you can't remember their actual name