Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Oil cooler copper banjo washers.. size?  (Read 756 times)

0 Members and 1 Guest are viewing this topic.

aaronjb

  • Guest
Oil cooler copper banjo washers.. size?
« on: 05 March 2014, 13:08:07 »
Before I go off and spend £1.02 each on part number 11076852 (here: http://www.omegaowners.com/forum/index.php?topic=90588.0) .. does anyone have one they could measure?

Seeing as they're just (I believe) a solid copper washer, one the right size from a kit like this should work, surely: http://www.ebay.co.uk/itm/140-Piece-Solid-Copper-Washer-Assorted-Box-Set-Sump-Plug-Banjo-Bolt-Tap-Case-/171254696452?pt=UK_DIY_Material_Nails_Fixing_MJ&hash=item27df934a04
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34012
  • Git!
    • View Profile
Re: Oil cooler copper banjo washers.. size?
« Reply #1 on: 05 March 2014, 13:23:24 »
Nope, aluminium washer, not copper.  :y
Logged

aaronjb

  • Guest
Re: Oil cooler copper banjo washers.. size?
« Reply #2 on: 05 March 2014, 13:32:22 »
Ahh..

Never mind, I'll get them from Vx and save myself the hassle then :) In fact, they have them in stock (amazingly) so I'll pick 'em up tomorrow morning.
Logged

slowboy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • lode
  • Posts: 354
    • View Profile
Re: Oil cooler copper banjo washers.. size?
« Reply #3 on: 06 March 2014, 11:32:39 »
if you have original heat to cherry red on gas the dunk in cold water.its annealed .
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34012
  • Git!
    • View Profile
Re: Oil cooler copper banjo washers.. size?
« Reply #4 on: 06 March 2014, 12:27:52 »
Quote from: slowboy on 06 March 2014, 11:32:39
if you have original heat to cherry red on gas the dunk in cold water.its annealed .

They get crushed during tightening so wont work well with these aluminium ones.

But works well on copper  :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.014 seconds with 17 queries.