Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JonesBloke]

Hi Omega owners - need advice.
I have a CDX with cloth seats. manual back rest adjustment, manual leg room adjustment and electric height adjustment - through a switch up/down.

Just bought Elite leather with electric everything.
Previous posts state the passenger seat just plugs in and it will work ? is this true as the Elite seat height adjuster is also the back adjuster through a switch up/down and left/right for backrest angle.
I understand the electrical mods needed for the drivers memory seat (joining wires) as described  in a earlier post.
Can anyone confirm or advice please? Great cars by the way.

[biggriffin]

Or you could just buy, a complete slate grey leather interior, from an O3, cdx.    , mmm now who might have one of those .. £75.00 collected.

[RobG]

If seats are from a late model Elite with passenger child seat module fitted, DO NOT plug in the yellow rectangular connector, also will possibly need a TechII chat. Elite seat bolts needed as well due to longer length

[JonesBloke]

got the longer cap screws. Child seat module? how do I know if this elite passenger seat has this fitted?

[Doctor Gollum]

got the longer cap screws. Child seat module? how do I know if this elite passenger seat has this fitted?

The passenger side dash end cap will have a warning sticker on it.

[cam.in.head]

Once you have done this what are you doing with your old seats. If they are dark grey cloth in good nick with working heaters ,airbags etc ,Ie ready to go in I might be interested in them ?

[ajsphead]

The how to guide is very good, follow it and you'll be fine. A little bit of electrical work, solder and heat shrink, don't bodge and a longer set of bolts and it's a simple change over. Remember to disconnect the battery as well to remove any likelihood of the pre-tensioners or airbags going off.