Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 [2]  All   Go Down

Author Topic: bloomin locking wheel nuts  (Read 3667 times)

0 Members and 1 Guest are viewing this topic.

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: bloomin locking wheel nuts
« Reply #15 on: 28 September 2009, 22:41:04 »
that looks a handy piece of kit andy :y
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39777
    • ML350 TDM SmartRoadster
    • View Profile
Re: bloomin locking wheel nuts
« Reply #16 on: 28 September 2009, 22:42:18 »
Quote
that looks a handy piece of kit andy :y

ATS used a similar set to remove mine, their's had a finer 'thread'/helix though .... probably best used with a windy gun.  :y
Logged

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: bloomin locking wheel nuts
« Reply #17 on: 28 September 2009, 22:46:48 »
Quote
Quote
that looks a handy piece of kit andy :y

ATS used a similar set to remove mine, their's had a finer 'thread'/helix though .... probably best used with a windy gun.  :y
trouble is, only about 5mm of coller if that to grip on.
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Re: bloomin locking wheel nuts
« Reply #18 on: 28 September 2009, 22:49:28 »
They wil come off with a deep impact socket hammered on them John told you the other day done a number of them now mate :y
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: bloomin locking wheel nuts
« Reply #19 on: 28 September 2009, 22:51:25 »
Quote
They wil come off with a deep impact socket hammered on them John told you the other day done a number of them now mate :y
bugger all to knock on to, also will need a 22/3mm socket then you run out of space between the nut & the hole in the wheel.
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

serek

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • huntingdon
  • Posts: 1992
    • 3.2 mv6
    • View Profile
Re: bloomin locking wheel nuts
« Reply #20 on: 28 September 2009, 23:00:56 »
Quote
Quote
very true, i think i will have to buy some decent drills then give it a go with the torx bit as serek suggests. :y

Buy a cheap Halfrauds set that you don't mind shearing off then, you don't want your best set of 'Draper's' getting damaged ;) ;D ;D
I got set of HILTI  drills use only 4 drills for this job :)
Logged

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: bloomin locking wheel nuts
« Reply #21 on: 28 September 2009, 23:11:33 »
Quote
Quote
Quote
very true, i think i will have to buy some decent drills then give it a go with the torx bit as serek suggests. :y

Buy a cheap Halfrauds set that you don't mind shearing off then, you don't want your best set of 'Draper's' getting damaged ;) ;D ;D
I got set of HILTI  drills use only 4 drills for this job :)
will give em a go serek :y
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

Gaffers

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • NE Hampshire/Surrey
  • Posts: 11322
    • Ford Ranger Wildtrak
    • View Profile
Re: bloomin locking wheel nuts
« Reply #22 on: 29 September 2009, 01:59:25 »
If you were closer I could lend you my universal socket.  It will do anything upto 32mm in diameter as long as it is not completely round.  Prob one of my most useful tools  :y
Logged

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: bloomin locking wheel nuts
« Reply #23 on: 29 September 2009, 11:42:48 »
update....drilled out & knocked a T50 socket into it, promptly twisted the socket. >:(
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

Welung666

  • Guest
Re: bloomin locking wheel nuts
« Reply #24 on: 29 September 2009, 11:55:54 »
Just keep drilling larger holes till the head comes off, take the wheel off and either weld a nut to the end or get the mole grips on what's left of the stud.
Logged

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: bloomin locking wheel nuts
« Reply #25 on: 29 September 2009, 15:56:42 »
Quote
update....drilled out & knocked a T50 socket into it, promptly twisted the socket. >:(
at last, drilled from both sides to weaken the stud, knocked an even bigger torx bit into it. it came off/out.  :y
however i need a new hub @ £58 >:(
« Last Edit: 29 September 2009, 21:06:54 by billthebrickie »
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.