Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Crazydad]

There is a HOW2 in the maintenance guide for crank sensor replacement. I personally would cut the old sensor off, and leave the old wire where it is.

Thanks James

[STMO123]

http://www.omegaowners.com/forum/YaBB.pl?num=1174321688

There's not a lot to be worried about

Do this sensor first and see how she runs. Knock sensor is not a hard job either, just make sure you route the cable out of harms way.

It takes you all a long time to say what I said in the second post.

Read the rather post before jumping in!

[Crazydad]

http://www.omegaowners.com/forum/YaBB.pl?num=1174321688

There's not a lot to be worried about

Do this sensor first and see how she runs. Knock sensor is not a hard job either, just make sure you route the cable out of harms way.

It takes you all a long time to say what I said in the second post.

Read the rather post before jumping in!

Thanks again Steve

No harm done they can all see that you gave me that advice First

Perhaps itīs just me being a little over cautious/Nervous that makes everyone keep on posting.

I for one welcome all Input on this Problem.