Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Auxillary drive belt route  (Read 2075 times)

0 Members and 1 Guest are viewing this topic.

mijfife

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Rosyth, Fife. Scotland
  • Posts: 295
  • AAARRRRGGGGGGGGG, IT'S WAS ONLY A GLS!!!!!!!
    • View Profile
Auxillary drive belt route
« on: 04 October 2006, 15:53:14 »
Bloody typical! I managed to fit the entire engine, hoses, wires etc but I'll be damned if I can work out the route that the auxillary drive belt takes  :-[ I bought a new one and it seems to be the same size as the one that came with the car but both seem a mile too big. Can anyone provide me with the correct route on a 2ltr DOHC with power steering and Air con pulleys please. Mr Haynes just says to note the route when you remove the old one, not much use if the old one isn't fixed on in the first place  >:(

I'm also a bit concered that the wiring harness to the alternator and starter motor is very close to the alternator pulley. Anyone got a pic of this as well?

Cheers Jim  
Logged
The fleet consists of a Singer Chamois Coupe, an Imp based kit car - BS Nymph, and a Kawasaki GPZ 900R (& a Toyota RAV4 LPG for the work horse!)

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: Auxillary drive belt route
« Reply #1 on: 04 October 2006, 15:59:01 »
From memory mine runs from the alternator pulley across to the pas pulley downwards around the AC compressor pulley to crank pulley and back on itself up round the aux tensioner then back to the alternator pulley.

HTH and makes sense  :)
« Last Edit: 05 October 2006, 07:58:42 by nixoro »
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: Auxillary drive belt route
« Reply #2 on: 04 October 2006, 16:17:08 »
Yep....alternator pulley....across the front of the cam cover and over the top of the PAS pulley, down and round the bottom of the aircon pulleyalong and around the crank pulley then up and around the right hand side of the tensioenr and back to the alternator pulley.
Logged

mijfife

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Rosyth, Fife. Scotland
  • Posts: 295
  • AAARRRRGGGGGGGGG, IT'S WAS ONLY A GLS!!!!!!!
    • View Profile
Re: Auxillary drive belt route
« Reply #3 on: 04 October 2006, 16:35:13 »
Thanks guys, I did try that, looks like BOTH belts I have are the wrong ones!!  :(

Cheers Jim
Logged
The fleet consists of a Singer Chamois Coupe, an Imp based kit car - BS Nymph, and a Kawasaki GPZ 900R (& a Toyota RAV4 LPG for the work horse!)

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33982
  • Git!
    • View Profile
Re: Auxillary drive belt route
« Reply #4 on: 04 October 2006, 16:38:21 »
Is one a close fit.......you are slackening the adjuster with a  15mmm spanner I take it.
Logged

mijfife

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Rosyth, Fife. Scotland
  • Posts: 295
  • AAARRRRGGGGGGGGG, IT'S WAS ONLY A GLS!!!!!!!
    • View Profile
Re: Auxillary drive belt route
« Reply #5 on: 04 October 2006, 16:46:23 »
Hi Marks, yes I was slackening the adjusted but I just realised what I was doing wrong. I was routing from alternator across top to pas, down to air con but was going around the tensioner BEFORE the crank pulley  :-[ :-[ Seems to fit fine now  ;)  Thanks for the help, another job done  :)

Cheers Jim
Logged
The fleet consists of a Singer Chamois Coupe, an Imp based kit car - BS Nymph, and a Kawasaki GPZ 900R (& a Toyota RAV4 LPG for the work horse!)

Markjay

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 5417
    • View Profile
Re: Auxillary drive belt route
« Reply #6 on: 06 October 2006, 23:26:46 »
Glad you got it sorted...

For future reference:



PS - This picture was someone’s Avatar, can't remember who it was, so apologies for not giving due credit...
Logged
Alas, no more Omegas....

Markjay

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 5417
    • View Profile
Re: Auxillary drive belt route
« Reply #7 on: 06 October 2006, 23:27:45 »
Ahmm. yes I know your's a 2.0... and this is a V6... just realised... sorry  :-[
Logged
Alas, no more Omegas....

mijfife

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Rosyth, Fife. Scotland
  • Posts: 295
  • AAARRRRGGGGGGGGG, IT'S WAS ONLY A GLS!!!!!!!
    • View Profile
Re: Auxillary drive belt route
« Reply #8 on: 06 October 2006, 23:29:25 »
But it would look a lot nicer in the engine bay  :)

Cheers Jim
Logged
The fleet consists of a Singer Chamois Coupe, an Imp based kit car - BS Nymph, and a Kawasaki GPZ 900R (& a Toyota RAV4 LPG for the work horse!)

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106838
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Auxillary drive belt route
« Reply #9 on: 07 October 2006, 08:48:03 »
Quote
Glad you got it sorted...

For future reference:



PS - This picture was someone’s Avatar, can't remember who it was, so apologies for not giving due credit...
if you have aircon on your v6, there will be another pulley bottom right that it needs to go round as well...
Logged
Grumpy old man
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.