Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JamesV6CDX]

Hi Guys

Got a V6 Elite outside and I'm half way through changing the timing belt kit (yes with the right tool)  

However, I have forgotton the torque values - and I've lost my DVD

I can't find them on Mark's torque thread either - Please can someone post up the torque values for the tensioner, and the idler rollers in particular.

Cheers
James

[RossPhim]

Right james this is from the book of lies, okay.

timing belt lower guide pulley bolt 40Nm.

timing belt tensioner pulley/upper guide pulley assembly
Backplate to cylinder head bolts 40Nm
Tensioner pulley Nut 20Nm
Guide pulley bolt 40 Nm
Hope this helps!

[RossPhim]

And
Timing belt cover bolts:
Outer cover 8Nm
Rear cover
  M6 Bolts  8Nm
  M8 threaded stud 10Nm

I think thats your lot.
Give us a shout if you need more.

[Allenm]

Crank pully               20 Nm
 
Water pump pully      Stage 1 - 8 Nm
                              Stage 2  - angle tighten a further 30deg
                              Stage 3 -  angle tighten a further 30deg
 
Power steering pully  Stage 1 - 20 Nm
                              Stage 2  - angle tighten a further 30deg
                              Stage 3 -  angle tighten a further 15deg

[Gwilym]

Hi Guys

Got a V6 Elite outside and I'm half way through changing the timing belt kit (yes with the right tool)  

You are filling me with confidence

[Gwilym]

However, I have forgotton the torque values - and I've lost my DVD


Cheers
James

But it is going again