Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: LED replacements for dash buttons  (Read 2682 times)

0 Members and 1 Guest are viewing this topic.

The Barge Captain

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 1758
  • Back in the land of the economicaly active
    • View Profile
LED replacements for dash buttons
« on: 09 November 2006, 09:40:54 »
Does anybody know where to source miniture LED's for fixing into the dash buttons - i.e the yellow one on my eco button has failed, and it's very small. Also they need to be 12v rated as no room to add a current limiting resistor. I'm not looking for a blue conversion but these things must be avalible as i keep seeing them on ebay. Tried Maplin electronics website but couldn't find what i wanted.
Logged
Thou art no more an angel filled with light, but a leech to be abhorred and thou shalt suffer my burning will...

Elite Pete

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chester
  • Posts: 19580
  • My spider senses are tingling
    • Audi SQ5 GSX1400
    • View Profile
Re: LED replacements for dash buttons
« Reply #1 on: 09 November 2006, 09:49:34 »
I have swapped my switches for LED ones bought off ebay and they all have resistors in them
Logged
Retired

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: LED replacements for dash buttons
« Reply #2 on: 09 November 2006, 10:08:32 »
If you're keeping the same colours, why not just change the bulb, rather than faff around with LEDs and resistors?
Logged
Grumpy old man

The Barge Captain

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 1758
  • Back in the land of the economicaly active
    • View Profile
Re: LED replacements for dash buttons
« Reply #3 on: 09 November 2006, 13:35:47 »
The lamps in the small push switches are very small solder in type, and don't look like anything avalible in either Maplin or my local car parts shop, and i doubt that they are avalible from Vx without buying a whole new switch - unless anyone knows differently.
Logged
Thou art no more an angel filled with light, but a leech to be abhorred and thou shalt suffer my burning will...

x25xe

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Hayes, Middlesex
  • Posts: 915
  • Avater removed due to size
    • View Profile
Re: LED replacements for dash buttons
« Reply #4 on: 09 November 2006, 13:38:50 »
You could try http://www.ultraleds.co.uk/.

I have used them in the past and found them to be very good.  Not sure if they will have exactly what you are looking for though.

One advantage of the LED of the standard bulb, is that the switch will not get hot when the function is switched on.  I generally drive round with climate on ECO and have found that the surface of the switch gets very hot.

Anyway, good luck.  Hope this helps.
Logged
1998 2.5 V6 Omega CDX, Leather and Electric Pack!

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: LED replacements for dash buttons
« Reply #5 on: 09 November 2006, 14:52:51 »
Quote
The lamps in the small push switches are very small solder in type, and don't look like anything avalible in either Maplin or my local car parts shop, and i doubt that they are avalible from Vx without buying a whole new switch - unless anyone knows differently.

Ordinary Vaux dash bulbs will fit, just bend the legs out from the side of the glass envelope.
Logged

The Barge Captain

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 1758
  • Back in the land of the economicaly active
    • View Profile
Re: LED replacements for dash buttons
« Reply #6 on: 09 November 2006, 16:33:35 »
some are smaller than that, however i've just tried to replace the lamp in the sunroof control and that one has a short narrow body with 2 long wire legs - looks as though that could be what i am looking for - just solder in place and cut the legs off
Logged
Thou art no more an angel filled with light, but a leech to be abhorred and thou shalt suffer my burning will...

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: LED replacements for dash buttons
« Reply #7 on: 09 November 2006, 16:39:21 »
Logged

Rob.

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • 0
  • Posts: 9
    • View Profile
Re: LED replacements for dash buttons
« Reply #8 on: 11 November 2006, 17:46:47 »
Where in Bristol are you  Captain? I've got a few various dash switches (the rubber coated ones) that the front has scratched off, your welcome to the bulbs from them to save messing around with the soldering iron.


Rob.
Logged

The Barge Captain

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 1758
  • Back in the land of the economicaly active
    • View Profile
Re: LED replacements for dash buttons
« Reply #9 on: 11 November 2006, 19:06:45 »
Quote
Where in Bristol are you  Captain? I've got a few various dash switches (the rubber coated ones) that the front has scratched off, your welcome to the bulbs from them to save messing around with the soldering iron.


Rob.
Winford - out by the airport.
Logged
Thou art no more an angel filled with light, but a leech to be abhorred and thou shalt suffer my burning will...
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.