Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Radiator pipe fouling switchover valve  (Read 984 times)

0 Members and 1 Guest are viewing this topic.

wakeyomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Wakefield
  • Posts: 450
    • View Profile
Radiator pipe fouling switchover valve
« on: 14 April 2007, 17:30:25 »

Hi All
Before recently joining this forum, I would lift my bonnet, briefly look in, gulp and then quickly close the bonnet and pretend that the engine compartment didn't really exist. Now I'm getting braver and am actually have a good look around to try and learn what does what, which may lead to a few silly questions. here is the latest....

The top radiator pipe (drivers side) that runs across the engine bay (to the secondary cooling pump?), is wedged between the radiator and the resonance pipe switch over valve (see picture), which doesn't seem right to me. Also, there is a plastic clip on the pipe to the left of the valve that is currently unemployed. Could someone on the forum with a V6 facelift with climate control please have a look and tell me where this pipe should route when passing the valve, and where the clip should be placed?

Thanks Pat
Omega Hypochondriac.

Logged
Remember, if you ever need a helping hand, you'll find one at the end of your arm

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34012
  • Git!
    • View Profile
Re: Radiator pipe fouling switchover valve
« Reply #1 on: 14 April 2007, 17:45:40 »

The clip has broken off the top edge of the radiator/fan cowling where it should run....
Logged
Pages: [1]   Go Up
 

Page created in 0.035 seconds with 17 queries.