Topic: Dead stuck on timing belt!!!!! (Read 3591 times)

Kevin Wood · « **Reply #15 on:** 05 August 2007, 21:47:21 »

Quote

IIRC the crankshaft needs to be at 4oclock before the cams can realigned safely but again I would wait for the experts just to make sure

Yep. Turn the crank back to 60 degrees btdc so the alignment tool is at about 10 o clock or the marking on the bottom of the pulley is at 4 o clock. This moves the pistons out of the way of the valves so you can safely turn the cams. Then turn the cams back to the TDC positions and lock with the tools. Move crank back to TDC and refit belt.

Kevin

JamesV6CDX · « **Reply #16 on:** 06 August 2007, 11:21:00 »

PM sent!!!!

News:

Author Topic: Dead stuck on timing belt!!!!! (Read 3591 times)

Kevin Wood

Re: Dead stuck on timing belt!!!!!

JamesV6CDX

Re: Dead stuck on timing belt!!!!!