Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Proz]

Hi all .... ive just got myself one of the RAC scanners ... now it has given me 2 pending codes ....P1781 engine torque signal unit ......and P0727 engine speed sensor circuit.....i have no warning lights on the dash ( and yes the bulb is there  ).... are these anything to worry about or should i erase them .... oh and i got the same result with engine running aswell

Cheers

[TheBoy]

were they current, or stored?  If later, clear out, and see what comes back in a weeek.

[TheBoy]

Hang on, these are autobox errors, not engine. Whats stored in engine?

[Proz]

Hang on, these are autobox errors, not engine. Whats stored in engine?

It says   codes total : 02
             fault codes : 00
             pend codes: 02
then it says P1781 GM Pd Engine Torque Signal Circuit
                 P0727 GM Pd Engine Speed Sensor Circuit No Signal

 :-/
On set up ive set it to GM cars ... is this right ??

Cheers

[TheBoy]

Hang on, these are autobox errors, not engine. Whats stored in engine?

It says   codes total : 02
             fault codes : 00
             pend codes: 02
then it says P1781 GM Pd Engine Torque Signal Circuit
                 P0727 GM Pd Engine Speed Sensor Circuit No Signal

 :-/
On set up ive set it to GM cars ... is this right ??

Cheers

Stupid gay thing is talking 'dangle berries' I reckon.  Neither of those codes exist on Simtec71 ecu, they are gearbox codes (both related to CAN receives errors - often related to failing CAM sensor)

[Proz]

Hang on, these are autobox errors, not engine. Whats stored in engine?

It says   codes total : 02
             fault codes : 00
             pend codes: 02
then it says P1781 GM Pd Engine Torque Signal Circuit
                 P0727 GM Pd Engine Speed Sensor Circuit No Signal

 :-/
On set up ive set it to GM cars ... is this right ??

Cheers

Stupid gay thing is talking 'dangle berries' I reckon.  Neither of those codes exist on Simtec71 ecu, they are gearbox codes (both related to CAN receives errors - often related to failing CAM sensor)

Mmm .... i'll clear them out and see what happens  

[TheBoy]

presumably the car is running OK?

[Proz]

presumably the car is running OK?

Yeah the car is going fine , i just thought i would get one for future use to save me paying Vx stupid money ..... cleared the codes and it now says no codes in engine or transmission ....