Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[MutantCav]

£30 mate and I'll send it special delivery which should only be a few quid as its not heavy...will be in the post tomorrow and with you by 1pm next day and the parcel shelf is on its way already

Just to check, the bolt that holds the rod onto the selector switch, or the bolt at the other end of the rod?

[RobG]

£30 mate and I'll send it special delivery which should only be a few quid as its not heavy...will be in the post tomorrow and with you by 1pm next day and the parcel shelf is on its way already

Just to check, the bolt that holds the rod onto the selector switch, or the bolt at the other end of the rod?

[/highlight]
Payment sent Where the long rod coming from the gearlever end meets up with the short one from the switch it`s the bolt that you slacken to adjust. On the long rod there is a nut welded one end, the bolt for that (retaining clip at gearlever end if you got it please ) Hope that`s clear to you

[MutantCav]

Will have a look and get a pic tomake sure its all the right stuff before I send it

[RobG]

Update on gearbox. Renewed gear selector switch (thanks Chris) and all seems ok at the mo. Many thanks to everybody`s advice and a special thanks to Chris (mutantcav) for posting the switch out asap. The problem seems to have been the inner nylon sleeve with the two flat "shoulders" developed a split and consequently the electronic signal from the switch was a bit haphazard. See pic. Once again a big thank you to all

[Entwood]

Nice to know its sorted .. OOF strikes again ..  

[MutantCav]

Glad its sorted Rob Let me know when the parcel shelf and self dipping rear view arrive

[RobG]

Glad its sorted Rob Let me know when the parcel shelf and self dipping rear view arrive

Arrived today Chris. Many thanks.

[MutantCav]

Glad it finally got there mate